Computer Restarts when trying to install Win but not while Running Knoppix?

Eocene

Limp Gawd
Joined
Nov 21, 2004
Messages
446
So I bought a new motherboard and PSU because I was having some problems with my old motherboard and my computer would reboot 2-3 mins. after loading windows.
I also had problems with both of my HDs—I lost all my data on one. In addition my video card died… and all this due to the fact that I shipped my computer and I didn’t really consider shipping it in parts.


* Anyway, my HD seems to be working fine [tested it in another computer] but my computer will still reboot when I try to install windows on it (at the menu where you get to choose which partition/hd you would like to install windows on). What puzzles me is that I’ve been running Knoppix just fine; I can even access my music and play everything for hours….. so I decided to try a Linux distro out….. while I did manage to get it installed and running it did the same thing windows used to do before I formatted the partition… it reboots 2-3 mins after everything loads.


Some people have suggested it might be the ram.. but I’m not exactly sure how that could be the case if I can get knoppix running just fine for days =(.

I really have no clue what’s going on…. anyone have an idea of what could be wrong?


Thanks
 
I tried my friends disk and even a non-windows CD (linux) and it still didnt work.... I tried my own CD on my friends computer (with my HD) and it worked fine.. so I am assuming it could not possibly be the CD or the HD.
 
of course Knoppix runs off the cd and not the hard drive, so you are comparing apples and oranges. The only thing that tells you is you have no huge cpu/motherboard/ram issue. That is good news. I would suspect the primary hard drive, use a diagnostic app from that drive manufacturer, they all make tham. They can be very very helpful. Run that and see what you get. Also, Knoppix has memtest86 on boot up, use the function keys to run that and rule out memory problems too.
 
Back
Top