Ok, I'm having a doozy of a problem here.
I recieved a computer from a friend that was in non-working condition (the original problem is not known). After taking the CPU out of it to test it (P4 2.8ghz 512k, 553fsb) on a known working computer, a compaq with a "ms 6577 v 4.1" 865g intel motherboard. The CPU worked in it, and then to test the motherboard on the first computer, I put the CPU from the working compaq into it (P4 2.8ghz 128k 400fsb celeron), and it worked. After putting my friend's old computer back together with it's original parts, it's working, I don't know what the problem was with it. But the real problem now though, is after re-assembling the compaq, it will not boot, power comes on, but no video. if I put the p4 from the old computer back in, it boots normally and without a problem, it doesn't seem to be working with the original celeron it had now. So, does anyone know what the problem may be? I already tried reseting the bios as well, and no go.
I recieved a computer from a friend that was in non-working condition (the original problem is not known). After taking the CPU out of it to test it (P4 2.8ghz 512k, 553fsb) on a known working computer, a compaq with a "ms 6577 v 4.1" 865g intel motherboard. The CPU worked in it, and then to test the motherboard on the first computer, I put the CPU from the working compaq into it (P4 2.8ghz 128k 400fsb celeron), and it worked. After putting my friend's old computer back together with it's original parts, it's working, I don't know what the problem was with it. But the real problem now though, is after re-assembling the compaq, it will not boot, power comes on, but no video. if I put the p4 from the old computer back in, it boots normally and without a problem, it doesn't seem to be working with the original celeron it had now. So, does anyone know what the problem may be? I already tried reseting the bios as well, and no go.