alright, so, I think my new PC just ate it, and I'm out of ideas for fixing it
background:
was playing L4D for a few hours last night, hosting a local server (me and one other person), it CTD'd once on us, so I restarted L4D, it went for another ~20-30 minutes, and then CTD'd again, it wasn't due to us playing with console or overloading the software
so I figure, ok, computer's been on for 5-6 days, lets reboot it, and see if things improve (normally they do), so I restart it, and the KB doesn't work (as in, it doesn't matter what you do, what you sacrifice to god, how many times you restart, how many times you clear CMOS, KB will not work, yes I tried other KBs, no none of them worked either (and PS/2 is NOT AN OPTION before someone suggests that (as the mainboard can't))
SO after screwing around with a windows (Windows XP for reference) recovery console/repair install, I finally decide to just nuke everything, so I get both disks to "unpartioned", create a "raw" partition, format it to NTFS, everything goes good
and then
BSOD !

with
"IRQL_NOT_LESS_OR_EQUAL"
some googling finds that this happens with overheating, I promptly clean the inside of my PC and make sure temps are good
IRQL_NOT_LESS_OR_EQUAL
clear CMOS and reset BIOS settings
IRQL_NOT_LESS_OR_EQUAL
its always at the exact same point, during the "Installing Windows" phase when it runs the progress bar for "Devices Installing" or whatever, always at the same point, just keeps BSOD'ing repeatedly
I have not changed hardware on this system since building it
It has never BSOD'd in the some 11 months of nearly consistent 24/7 operation
it will sit stable in BIOS, or any bootable environment (DOS, Win Receovery Console, System Works' bootable environment, Win installer, etc) with no issues
it doesn't reboot loop (and never has)
SO
before it gets to have a nice'n'personal with an axe
mad
does anyone have any advice?
specs:
Intel DX48BT2
Intel Core 2 Quad Q9550 (is currently, and always has been, 100% full stock, with EIST enabled)
G.Skill Pi Series DDR3 1333Mhz
Sapphire Radeon HD 4870X2 2GB
PC Power & Cooling TurboCool 860W (non-ESA version)
2x WD CaviarGP 500GB (the older version with 16MB cache)
Auzen X-Fi Prelude
haven't changed any hardware since this came out of boxes from newegg, haven't overclocked any hardware, haven't modified any hardware, temps are alright (40-45*C on CPU, 60-70* C on GPU), to my knowledge no surges/etc (there is a surge protector between the PC and the wall, and nothing else on the protector is displaying any issues, so I don't think a power surge damaged anything), I didn't see any burn marks or burst capacitors on the mobo/HDs/graphics card, theres no artifacts/distortion on screen, etc
I'm really beating my head against the wall here, because for all intents and purposes this shouldn't even have failed in the first place, let alone be FUBARd like this

sorry for the ridiculously long post, figured I'd provide everything I can (if theres something I missed, just ask)
background:
was playing L4D for a few hours last night, hosting a local server (me and one other person), it CTD'd once on us, so I restarted L4D, it went for another ~20-30 minutes, and then CTD'd again, it wasn't due to us playing with console or overloading the software
so I figure, ok, computer's been on for 5-6 days, lets reboot it, and see if things improve (normally they do), so I restart it, and the KB doesn't work (as in, it doesn't matter what you do, what you sacrifice to god, how many times you restart, how many times you clear CMOS, KB will not work, yes I tried other KBs, no none of them worked either (and PS/2 is NOT AN OPTION before someone suggests that (as the mainboard can't))
SO after screwing around with a windows (Windows XP for reference) recovery console/repair install, I finally decide to just nuke everything, so I get both disks to "unpartioned", create a "raw" partition, format it to NTFS, everything goes good
and then
BSOD !
with
"IRQL_NOT_LESS_OR_EQUAL"
some googling finds that this happens with overheating, I promptly clean the inside of my PC and make sure temps are good
IRQL_NOT_LESS_OR_EQUAL
clear CMOS and reset BIOS settings
IRQL_NOT_LESS_OR_EQUAL
its always at the exact same point, during the "Installing Windows" phase when it runs the progress bar for "Devices Installing" or whatever, always at the same point, just keeps BSOD'ing repeatedly
I have not changed hardware on this system since building it
It has never BSOD'd in the some 11 months of nearly consistent 24/7 operation
it will sit stable in BIOS, or any bootable environment (DOS, Win Receovery Console, System Works' bootable environment, Win installer, etc) with no issues
it doesn't reboot loop (and never has)
SO
before it gets to have a nice'n'personal with an axe
specs:
Intel DX48BT2
Intel Core 2 Quad Q9550 (is currently, and always has been, 100% full stock, with EIST enabled)
G.Skill Pi Series DDR3 1333Mhz
Sapphire Radeon HD 4870X2 2GB
PC Power & Cooling TurboCool 860W (non-ESA version)
2x WD CaviarGP 500GB (the older version with 16MB cache)
Auzen X-Fi Prelude
haven't changed any hardware since this came out of boxes from newegg, haven't overclocked any hardware, haven't modified any hardware, temps are alright (40-45*C on CPU, 60-70* C on GPU), to my knowledge no surges/etc (there is a surge protector between the PC and the wall, and nothing else on the protector is displaying any issues, so I don't think a power surge damaged anything), I didn't see any burn marks or burst capacitors on the mobo/HDs/graphics card, theres no artifacts/distortion on screen, etc
I'm really beating my head against the wall here, because for all intents and purposes this shouldn't even have failed in the first place, let alone be FUBARd like this
sorry for the ridiculously long post, figured I'd provide everything I can (if theres something I missed, just ask)