Computer freezing soon after boot

Animate

n00b
Joined
Jul 26, 2005
Messages
23
I'm putting this in motherboards because I'm 90% sure it's motherboard related. I recently built a computer with an ABIT AN8 SLI Fatal1ty board, a 3800+ X2 Manchester, and a PCI Xtasy 9200 128mb video card. Soon after booting it up, it will freeze. If it's been on recently, it may only take around 5 minutes, and if it's been off, it can take a few hours, which makes me think it may be heat related. Currently, I plan to reformat as soon as I get my CD back, and, if that doesn't work, I'll try to switch the board. I also thought it may be the HDs, but they've never failed me before, and even though that's probably a bad reason to trust them, I don't know of any way to check them. I guess I'll try disconnecting them and loading up Knoppix to see if it still freezes on me. If any of you have any ideas on what the problem may be, or a way to test to see what it is, please either post in this thread or private message me. Thanks in advance.

Oh, and my reasons for thinking it's the motherboard are based on a couple of things - first off, the drivers that shipped with the board will crash a fresh installation of Windows when installed, and the crappy response from tech support makes me think little of their production quality. Second, even after an update, BIOS will forget what items are on its IDE ports after messing around inside it, and it will take several reboots and profile reloads in order to figure out what it was that was on them, which again makes me think badly of them. The computer worked for the first week before this started happening, but I've already tried System Restore, and I'm pretty sure this one isn't driver related. But then, I suppose I'll find out after I try the reformat.
 
Well I read up to the part where you said X2 3800.

Anyhow I just put my DFI Ultra-D/X2 3800 together today and had a no boot problem. I would just get a solid beep. When to the DFI forums and found out that I wanted to start out with one mem chip in slot 3. BAM!!! She booted... Flashed to the current bios and have not had a problem since.

So basically I'm saying to check in on a ABIT help site for a quick answer..


But in your case check to see if you're having an IRQ problem. Same type thing happened to be before with an Asus board and it ended up being that my sound card was causing the problem. Moved it to another slot and the IRQ problem was fixed with no problems since..
 
Already tried that... but ABIT's support is total crap. When I e-mailed them about the driver they shipped crashing Windows, I got this response -

Dear Valued Customer,

we do not have this problem
please use minimal conponents in the system to install Windows
remove anything that you do not need.


Thank you for choosing ABIT.

If they'd actually read the e-mail I sent, they'd notice I already tried that. Not only that, but while I was waiting for a response I went to their forums and made a post, since I figured that would be faster. Turns out, lots of people had the very same problem, even if all of them didn't, so if they didn't have any info on the problem I'd be very surprised. I'm not pleased with their tech support at all - I plan on trying to return the board and complaining about tech support as part of my reasons. I'd really like to get the stupid guy who sent me that message fired.

I might add that it seems like the computer will freeze sooner if I'm playing music, which happens to be the most resource-taxing thing I do with my computer, at least so far. I haven't tested this or anything, and the times seem to be somewhat random anyway.
 
Hmm... not a very good one. I picked it up at a tiny shoppe near my house for 25$. Let me go check the brand... ah, looks like 'Apower". There's a lightning bolt between the A and Power, as well. It says Power S on it, which I guess is the model. It's ISO 9001 certified, which is apparently what they go by at Verizon when they buy parts (albeit not computer ones), information I got from my dad who's in charge of that stuff at Verizon, but I don't know how much weight that carries inside the PC world. I hadn't considered the power supply, probably because my dad has had a similar problem with a computer of his and a power supply switch didn't fix it. Oh, and the supply is 400 watts... which should be more than enough for what I've got. 2 HDs, 2 DVDs, 1 PCI video card, 2 512 sticks of RAM, and some USB ports. Nothing major.
 
The important thing about a power supply 4 any AMD64 system is a decent 12v ampage.
genarally speaking you need 24A on the 12v to get a decent stable system.
 
I hope you mean 12v+. And on that, I have 25A, so I should be fine. I think it's the freaking board, I'm going to try to return it.
 
Turns out it was ram. Which may be, in a way, board related, but still my fault because the ram wasn't on the QVC. Part board, part AMD for memory controller on chip, and part me. Anyway, my friend suggested increasing/decreasing voltage on ram and/or loosening the timings. I tried several voltages and it usually just got worse, and the board's way of changing timings were just too complex. Fast forward... I finally got fed up with it and planned on buying different ram, so I set everything back to the way it was. As an afterthought, I changed my FSB to 210 instead of 200 and rebooted. My computer hasn't been off since then, and it's been days... I plan on running memtest to be sure, though. Basically, from what anyone I've yet talked to, there is NO reason why it shouldn't still be rebooting, but hey, I'm not gonna complain. I'll still keep some money aside for backup ram if this crashes.
 
Back
Top