Computer failure

F

Fading Phoenix

Gawd
Joined
Sep 14, 2006
Messages
602
Alright, my rig is listed below. Recently the usb ports had not been working, and when I tried to install my printer driver it brought up a message informing me that my computer did not have the required usb hardware. I also noticed during this time that when I booted up the machine I was not seeing the post screen for my motherboard, nor was I hearing the normal beeps that would also sound during this. Anyway, I opened up the computer not really expecting to solve anything, I unplugged the 24-pin power cord as well as a few other things and then just replaced them. When I hooked my computer back up and turned it on however, I recieved no image. The LED's on the case would light up, and the fans would turn on but that was all. I've removed and then replaced all the hardware, and checked several times to make sure that everything is connected right as well as tested the computer with a different monitor and different cords/plugs. I've tried it with the second processor power cord and the second PCI-express power cord, but I still cannot get any form of an image. I can't figure it out, would anyone have any idea what could be causing this problem?
 
Fading Phoenix said:
Alright, my rig is listed below. Recently the usb ports had not been working, and when I tried to install my printer driver it brought up a message informing me that my computer did not have the required usb hardware. I also noticed during this time that when I booted up the machine I was not seeing the post screen for my motherboard, nor was I hearing the normal beeps that would also sound during this. Anyway, I opened up the computer not really expecting to solve anything, I unplugged the 24-pin power cord as well as a few other things and then just replaced them. When I hooked my computer back up and turned it on however, I recieved no image. The LED's on the case would light up, and the fans would turn on but that was all. I've removed and then replaced all the hardware, and checked several times to make sure that everything is connected right as well as tested the computer with a different monitor and different cords/plugs. I've tried it with the second processor power cord and the second PCI-express power cord, but I still cannot get any form of an image. I can't figure it out, would anyone have any idea what could be causing this problem?
Click to expand...

It is your motherboard. RMA it and get a new one
 
You must log in or register to reply here.
Back
Top