Computer doesn't stay shut down

amorpheus

n00b
Joined
Jan 31, 2009
Messages
41
I built a new system yesterday and it went absolutely smooth and is working nicely except that I created an undead beast.

When I shut it down (be it the "power off" in Express Gate or a Windows shutdown) it does wind down as I would expect it to, drives and fans turning off. But a few seconds later it switches back on as if I'd pressed the power button. Initial googling pointed me towards "wake on x" settings, but I went through the BIOS, which already had the newest version, first thing and those have never been on. It shouldn't be OS dependant because it doesn't stay powered down if I do it through Express Gate. I tried moving various related-sounding BIOS settings, as well as loading defaults, or disconnecting the case functions, but so far nothing seems to do the trick except switching power off by pressing the button for four seconds. The PSU has special cords for fans and is keeping those on slow speed for a while after shutdown to maintain airflow, so maybe that's doing something weird. But I didn't have this problem with the computer it's been in before.

The setup:
Mainboard: ASUS P6T Deluxe (i7 920)
Memory: 3x2GB Corsair 1600MHz
Video Card: Sapphire 4870 (512MB)
Power Supply: bequiet! Dark Power 470W
Case: Cooler Master HAF 932

Any ideas? Did I miss wake-related settings that are buried somewhere else?
 
So, by case functions, do you mean the front panel i/o header? If not, I would say make sure your front panel i/o header is wired properly. My case for example, if I power it down the power light goes out on the case but when I flip the case power on using the PSU switch, the power light is on, even though I haven't booted the machine.

It sounds like your chassis is giving the motherboard the signal to power on some how. Try running the system with nothing except the power switch hooked up on the i/o header. Leave the reset sw, hdd led etc off. Maybe ensure that the power supply is completely hooked up properly? It's definitely a motherboard/psu setting.

Maybe try fail safe defaults for bios?
 
^ if that still fails, check again, go under power, apm config, and make sure its all disabled
 
I had a board that did that. There was a setting in the BIOS that said something along the lines of "power on after power loss".. I had to disable it.
 
To determine if its the motherboard or something external to it, disconnect everything such as the front panel audio / power button header etc. and turn the board on using the power button thats on that particular motherboard (I have the same one).

Might help you figure out if it's a connection or motherboard configuration issue
 
That's one of the settings I looked at first and it's set to "power off".

Try running the system with nothing except the power switch hooked up on the i/o header. Leave the reset sw, hdd led etc off. Maybe ensure that the power supply is completely hooked up properly? It's definitely a motherboard/psu setting.
Thanks to the onboard buttons that was one of the first things I tried. I re-attached the PSU connector and also tried the 8-pin plug for 12V instead of 4-pin but (as expected) that made no difference.

Other than this I'm not having any issues. At all. I'm thinking either there's some obscure BIOS bug, Mainboard simply broken or my power supply is doing something that it shouldn't. I'll try to get a different PSU next week to see if that changes anything.
 
Humm,

do you have a ups that's sending a comm port signal or something???

Try turnning off all the wake commands in your bios.

You might also want to try disconnecting your keyboard, the power on keyboard button may be stuck????

In either case would you rather have it the other way.
 
You tried unpluging the power button switch from the header and then shutting down, correct?
 
yes, could be broken power switch. or a short. are any of the pins for the front panel connectors bent or touching?
 
I tried it with no switches connected at all. If it was shorted I couldn't turn it off by pressing it four seconds. And it stays off if I do that.

do you have a ups that's sending a comm port signal or something???
No UPS...
 
It also may be something in a PCI slot or something along those lines. I had a customer's computer keep rebooting on me, checked the BIOS and everything looked fine. I took out their Firewire PCI card and it shutdown completely.
 
might post some pics of your BIOS pages for power settings ...

could save an RMA delay or the cost of a new PSU ... :p
 
Trust me, it's all disabled. No cards in there other than for graphics.

Thanks to the help so far, I'm waiting for Asus to answer my support request now. Either it's a known problem or I'll have to exchange it.
 
Actually clearing the CMOS (also removed the battery for a bit) solved the issue. I guess there's a reason Tech Support usually sticks to a routine that covers the basics first. :>
 
Funny...I was just going to reply that I had the EXACT same issue and the only thing that solved it for me was clearing the CMOS.
Glad you solved your issue...sorry I didn't see the thread sooner! ;)
 
Back
Top