Computer Build Complete...Time To Overclock

HomerRulez

[H]ard|Gawd
Joined
Apr 17, 2005
Messages
1,362
Finally got this sucker put together, formated and installe d windows and im back online. It was easier than I thought and the mobo manual had pictures :D . Anyways I got everything but the side audio ports not working. The USBs right next to them work well but the audio doesnt at all. Anyways no big deal. Also I found out this thing only has one ide port. Which sucks cause i had an hdd with all my backups on it and i wanted to transfer them to the new sata 2 hdd. I just finished running 3dmark and I got a 6900 something without OC and with the 7800gt in SLI. Is that a good score for my type of PC? Also extracted a 600mb file in 17 secs. Also without overclocks.

Now here is why i havent overclocked anything....I DONT KNOW HOW! I found some guides but they are for asus and have a lot of disable AI stuff. I dont have asus and the last time i did it was a p4c800 deluxe or somehting like that. I think that was one fo the first models to come out with AI? I dont know for sure though.

Does anyone here know how to overclock the 680i mobo and e6600 combo? I have only stock cooling with 2 80mm fans in the back and 1 in the middle on the left side (window). The bios looks confusing. Just so you know the system runs great. Last time I had a system this good si when I had a p4 3ghz system with a 5900ultra and asus p4c800 mobo. That mobo was a lot easier to OC but the OC was never higher than 3.3ghz.

BTW THANK YOU ALL. The help I got here was nothing short of spectacular. You all rock!
 
I just OC'd my e6300 myself, first OC as well. It was a little difficult getting to know the BIOS, so my first recommendation would be to google your board's model number and ad OC or overclock to the end. When I did I got several sites mapping out each screen and what each option does. This is important as many responses you will get will use lingo that, while correct, will not line up word-for-word with what is listed in your bios. The functionality will be there, but the language used varies.

The second recommendation is to get new cooling. While, yes, the intel stock coolign isn't that bad at all, it isn't enough (at laest for me) to overclock with low enough temps and be able to go to sleep at night. I picked up a Zalman CNPS9500 for $40 at a closing CompUSA near me (there's probably one near you too). I got cooler temps at idle than my stock cooler by around 10 degrees C.

Here are two resources I found invaluable (courtesy of Overclock.net):
http://www.overclock.net/new-members/6410-overclocking-acronyms-dummies.html
http://www.overclock.net/new-members/39747-ultimate-overclock-net-guide-compilation.html
That second link, especially, contains a lot of articles and how-to's.

Good luck!
 
disabled the stuff I needed to. Set the fsb to unlinked and then set the fsb from 1066 to 1380 and it would work. Then to 1200 and still didnt work. Got a lot of beeps going. Not just one or two. Just continuous beeps. Oh wells. Its not like OC from 2.4 to 3.0 will do me much in performance gains anyways. oh wells!
 
disabled the stuff I needed to. Set the fsb to unlinked and then set the fsb from 1066 to 1380 and it would work. Then to 1200 and still didnt work. Got a lot of beeps going. Not just one or two. Just continuous beeps. Oh wells. Its not like OC from 2.4 to 3.0 will do me much in performance gains anyways. oh wells!
The beeps are worrisome, but I would try setting up a divider between your ram and FSB, start with 1:2.
 
The beeps are worrisome, but I would try setting up a divider between your ram and FSB, start with 1:2.



how worrisome? We talkin fry anything inside my case worriesome? Anyways its just pointless when i think about it. 600mhz above stock speeds is going to give me how much of a performance increase? Possibly not much so warrant the overclock on stock cpu.
 
how worrisome? We talkin fry anything inside my case worriesome? Anyways its just pointless when i think about it. 600mhz above stock speeds is going to give me how much of a performance increase? Possibly not much so warrant the overclock on stock cpu.
Well, it's been my experience that beeps means there is something WRONG. Whether it be a setting that is invalid, or a hardware error. Just to make sure, run MEMtest to make sure your ram isn't erroring out when you set the fsb higher. I don't have a lot of experience in overclocking, but i do in pc repair. 90% of mobo error beeps are memory issues.
 
ok i will try one more time and get things set back to the way they need to. Now on stock, how much fsb should I add? the starting point is 1066 or 1067 so should i just instantly jump to 1300?
 
getting 3.38 ghz by disabling the stuff it asked me to and changing the fsb from 1066 to 1380 i think. Whatever fsb equal 3.38 from 2.8. Anyways how do I tell the temp of my system now? Also whats the temp I should make sure i stay away from?
 
getting 3.38 ghz by disabling the stuff it asked me to and changing the fsb from 1066 to 1380 i think. Whatever fsb equal 3.38 from 2.8. Anyways how do I tell the temp of my system now? Also whats the temp I should make sure i stay away from?
Google and dl speedfan. Try to keep your CPU temps below around 60-62C. Those are the higherst, UNDER LOAD that I would be comfortable with.
 
ok got speed fan

here is an img of what it says

what does blue arrow down, red arrow up and green check mean?


wdwewefsdfd.jpg
 
ok got speed fan

here is an img of what it says

what does blue arrow down, red arrow up and green check mean?
Blue arrow down means it's cooling down vs a red arrow which means it's heating up.
A green check means it's ok. Supposedly. Pay attention more to the numbers than the arrows.
Those represent idle temps, which is a good thing, these are good idle temps.

Now, go download OCCT and run it for about ten minutes while running speedfan where you can see it. Watch those temps and see where they max out:
http://www.ocbase.com/perestroika_en/index.php?Download
This will run your processor and both cores at %100. It's also a stability benchmark, and will look for any issues that may raise with your settings.
Again, you don't want your load temos to be over around 61-62C ideally.
 
64c for a min of 97-100%

is that good under load? My computer wont really reach that 100% ever anyways so I dont need to unbderclock my cpu back to normal?
 
64 is not too bad at all, esp under stock cooling. Sometime when you have the time, let OCCT run for the full half-hour. Like I said, it checks to see that your OC is stable. Yes, it is way more sensitive than your normal usage will be, but it's a good measure. It's always a good idea to run a stability check on any OC. Also, only a minute to 64C is pretty quick, see where it gets under load for longer.
 
im scared my cpuw ill fry if I leave it one. I saw a fire symbol when it hit high 50 and low 60s. Does that mean my cpu is frying?
 
computer crashed after 5 min at 55 secs. Well it didnt crash more like the occt program said crashed and started blinking the off button.
 
Yea....
A: 74 is too high by far. To keep this OC you will need a different cooler.
B: Crashing after 5 min means your OC is unstable. To fix it you would probably want to pump more voltage to your cpu, but with those temps, you'd melt it. For your current hardware, pull back the OC by 100mhz or so and run OCCT again. Try and keep your temps under 70 if at all possible.
 
Back
Top