This morning my pc told me my network cable was unplugged after being on the net for 30 min. I rebooted the computer and was confronted with the beep code: 1 long, 2 short.
No video though case and cpu heatsink fans are running
I researched these codes and found : video ram error or memory error (depending on where I went)
This is my system:
Asus A8N 32sli deluxe
Opteron 170 (stock)
EVGA 8800gts video card
2x1gb OCZ DDR PC3200 (set to correct voltages and timings)
Enermax Noisetaker EG701 power supply
Samsung and Seagate SATA drives (2 of each)
Benq 1620 dvd burner
This is what I've tried:
(1) reseated video card and memory
(2) swapped video card to diff pci-e slot
(3) swapped video card for known working backup
(4) swapped memory for spare set of 2x512mb PC 3200
(5) gave mobo a once over to check for blown caps >>>none found
Things I'm contemplating doing:
(1) changing power supply (too much hassle now since I'm going to work in 20 mins)
(2) try other 2 memory slots (didn't do it yet since manual said to use A1 and B1 slots for my configuration)
This incident will make me get off my ass and finally upgrade to my I7 system in waiting, but I hate to build under these conditions.
Any and all input and suggestions are appreciated.
Thanks
No video though case and cpu heatsink fans are running
I researched these codes and found : video ram error or memory error (depending on where I went)
This is my system:
Asus A8N 32sli deluxe
Opteron 170 (stock)
EVGA 8800gts video card
2x1gb OCZ DDR PC3200 (set to correct voltages and timings)
Enermax Noisetaker EG701 power supply
Samsung and Seagate SATA drives (2 of each)
Benq 1620 dvd burner
This is what I've tried:
(1) reseated video card and memory
(2) swapped video card to diff pci-e slot
(3) swapped video card for known working backup
(4) swapped memory for spare set of 2x512mb PC 3200
(5) gave mobo a once over to check for blown caps >>>none found
Things I'm contemplating doing:
(1) changing power supply (too much hassle now since I'm going to work in 20 mins)
(2) try other 2 memory slots (didn't do it yet since manual said to use A1 and B1 slots for my configuration)
This incident will make me get off my ass and finally upgrade to my I7 system in waiting, but I hate to build under these conditions.
Any and all input and suggestions are appreciated.
Thanks
Last edited: