compresion fitting question

[sethiano]

Hi,

I Have a spot in my loop i am building which will go - tube - 90degree - tube. So basically I need a double ended 90 degree compression fitting, but I am not seeing any.

What is the common practice for this.

Basically I bought this, but didn't realize 1 end goes in to a rad or block.

http://www.performance-pcs.com/new-...ing-g-1-4-thread-id3-8-od5-8-matte-black.html

I just need a double ended version of this so both ends will accept tube and a fitting.

Do I Just need an additional part, or do they have a whol different part.

Enzotech preffered.

Please let me know.

Thanks in advance!

Seth

 

[sethiano]

I also have the same problem with one of my 45 degrees. this was the product i bought, but it needs to accept hose on both end

http://www.performance-pcs.com/alph...on-fitting-45-revolvable-g1-4-deep-black.html

 

[sethiano]

ok so looking around i think what i need is a 1/4" female to female extender, then just screw on a straight fitting on the other end


http://www.performance-pcs.com/ek-af-extender-12mm-f-f-g1-4-black.html

so it would go: tube > 90d > femle2female > straight fitting > tube.

thoughts?

 

[Tsumi]

They make 90-90 female on both ends.

 

[sethiano]

They make 90-90 female on both ends.

can you link me to some? i am not finding any through google or known websites. I need one 90 and one 45. enzotech pref, but since i cant find them i wont be picky.

thanks!!!!

 

[sethiano]

Hey Tsumi,

THese are what I found.

I would basically just need a straight fitting on each end of each of these to connect the tube to correct?

1x http://www.performance-pcs.com/alph...-4-revolvable-2x-inner-thread-deep-black.html
1x http://www.performance-pcs.com/alph...-4-revolvable-2x-inner-thread-deep-black.html

 

[Tsumi]

Yep, that would work.

 

[sethiano]

Yep, that would work.

Thanks. After reviewing with friend I think that is going to be super heavy. I think I'm going to try to just run the hose with no fittings in between. I think I can get it to flow with no kinks. If you find any double ended 90s or 45s let me know. I couldn't find any.

 

[Zoomov]

Have you chosen Enzotech or another brand?

 

[sethiano]

Have you chosen Enzotech or another brand?

I picked Enzo tech but they don't have 45d compressions, only barbs (in black at least), so I have since then returned them all and will be going bitspower with soft tube or primo chill and rigid. Haven't decided yet.

 

[Zoomov]

take a look at BARROW brand
it is the same as bitspower (they say) but cheaper

 

[sethiano]

Thanks! will check it out!

 

[sethiano]

cant find a place that has 3/8 5/8 matt black in all the fittings i need. only place i can find is allie express and ebay that has random ones, and some store that charges the same price as bitspower heh. thanks though!

 

[sethiano]

Just bit the bullet and chalked up 10 bitspower fittings =)