Comp chocking up in games

DCookSta

[H]ard|Gawd
Joined
Oct 4, 2001
Messages
1,095
My computer has a problem with pauses while playing games, or running benchmarks. The pause can come at any time and is about 10-15 seconds long. After that, everything goes back to normal. These pauses come about every 5 minutes. No HD activity is going on at this time, everything just stops. Other than games, the computer runs very smoothly. There is no overclocking on this system at all. Here’s a run down of my specs.

MSI K7N2 Delta-L
60 Series Nforce drivers
AMD Athlon 1.333
512MB PC3200
Maxtor 60GB HD only 1/3 full
Page file: Min 384MB / Max 768MB
BFG 256MB Nvidia 5500oc stock 56.54 drivers (Tried 61.77 but FPS shot way down)
WinXp Pro
DirectX 9.0b

What can explain these pauses while playing games like UT2K4?
 
Start Run msconfig
>Uncheck all startup items, then
>go to Services, and hide all Microsoft Services, then... :mad: Sorry=Correction.....then go and disable the rest of them, which will not be microsoft...!!
>Apply and reboot.

See what happens now.

Also, if you look in eventviewer, were there any problems logged ? ;)
 
You mentioned disable all microsoft services, but if I do that, can't I end up turning something off that I need?

Nothing really unusual in my eventviewer but ESENT comes up a lot:

wuaueng.dll (848) SUS20ClientDataStore: The database engine started a new instance (0).
wuauclt (848) The database engine 5.01.2600.0000 started.
wuauclt (692) The database engine stopped.
wuaueng.dll (692) SUS20ClientDataStore: The database engine stopped the instance (0).
wuaueng.dll (692) SUS20ClientDataStore: The database engine has successfully completed recovery steps.
wuaueng.dll (692) SUS20ClientDataStore: The database engine has begun replaying logfile C:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log.
wuaueng.dll (692) SUS20ClientDataStore: The database engine is initiating recovery steps.

Over and over again, i'm going to have to look into what this is.

I went through msconfig and disabled a few things that i'm not using right now, we'll see how things go.

Thanks
 
No, I said hide all microsoft services, then after you done that , the rest of the services is visible, then you go and disable them, and reboot. Make sure all items at startup is disabled/unchecked also. :eek:

I got same in eventviewer, except for the corrections. :p
wuaueng.dll (692) SUS20ClientDataStore: The database engine is initiating recovery steps.

Have you got Hypertreading enabled ? If so disable it in BIOS and try again. ;)
 
i think you meant 'choking' lol :p

umm, i've seen stuff like this happen because the HD was too fragmented. Try running defrag.
 
Have you perhaps updated windows, and someting left halfway or went wrong ? Can you perhaps remember after what installed it started hapening ? SP2 ? I can remember I never actually saw "ESENT" in eventviewer, but only lately. I do not have SP2 yet, but does have some SP2 hotfixes.....It must have one of those last ones....Maybe something went wrong with some of your last updates, if you hav't got SP2. :rolleyes:

Another angle: Your antivirus may be interfering...I have Norton....Which Antivirus you got ? :confused:
http://www.servertalk.org/showthread.php?t=29
One can prevent antivirus from scanning those stuff, but I am nut sure if it's a good thing.
>I remember some time ago, there was a large update from Symantec involving rebooting and re-updating on same go.

Use msconfig as I said, and with all the extra stuff [AV included] disabled, reboot and check....I have instances of ESENT, but not the errors, and my log as you refered to, is full of coded data viewed with notepad.
:)

Event ID:
http://www.eventid.net/
:D

In your case, I would also disable automatic updating and check if errors disappeer..I got myne disabled.
 
Moto Guzzi said:
No, I said hide all microsoft services, then after you done that , the rest of the services is visible, then you go and disable them, and reboot. Make sure all items at startup is disabled/unchecked also. :eek:

I got same in eventviewer, except for the corrections. :p


Have you got Hypertreading enabled ? If so disable it in BIOS and try again. ;)

I don't have a multi-threaded CPU
My anti-virus is AVG which is always running in the background. I have turned off automatic updates as of now. So far I have disabled fast writes in my BIOS, still haven't checked my services, but now seems i have a larger problem, the card is being detected as PCI, looks like i need up update my mobo drivers.

and yes, i did mean 'choking'


*Edit
I reinstalled my GART driver and now my pci/agp thing is fixed, but now have to work on this pausing issue. Could it possibly be heat related? My case has in intake and exhaust fan, but i know my cable management could be better. I've been kinda wanting to add a blowhole anyway
 
I'd hate to speak too soon, but I think i got things figured out. Seems as if some of my memory timings were wrong. When I updated my BIOS I guess some things changed that I didn't notice..I had the MB doing AUTO settings in the 'high performance' option. Anyway now I have them set 'by spd' and I don't get those annoying pauses anymore.

What's the diff between AUTO and SPD anyway? my MB manual is no help
 
Back
Top