Comments on future build please

crewkip

Limp Gawd
Joined
Dec 19, 2006
Messages
328
CPU: E6600

RAM: 4GB DDR2 667 (Already have it so will just shove it all in)

Video Card: Sapphire X1600 Pro (Already have it, will wait to see what prices do)

Monitor: Sceptre 22” Gamer (Have it)

Hard Drive: Some 320 GB 7200 RPM (Have it already)

Case:
COOLER MASTER Centurion 541 RC-541-SKN1
Link to manufacturer website

MOBO ASUS P5B-VM LGA 775 Intel G965 Express Micro ATX Intel Motherboard

PSU: Sunbeam Nuuo 550 Watt Modular Power Supply

Optical Drives: LITE-ON Black 18X DVD+R 8X DVD+RW

Speakers: Klipsch Promedia 5.1 Ultras (Already have em)

Sound Card: DIAMOND XtremeSound XS71DDL 7.1 Channels 24-bit 96KHz

I need some good case fans since the case does not include any. Looking for quiet but powerful. Also need a CPU fan, was thinking a Zalman 9500.

I do want to overclock but nothing extreme.
 
Since you're planning on overclocking why not get an E6300 or E6400, or even the E4300. The tuniq tower may be a better option for a CPU cooler, i'm not sure if that will be too big for your case, though; it probably won't be a problem. If you want to save some extra cash, the onboard sound on the motherboard would probably be fine for an average user's needs, are you planning on doing much audio-intensive tasks?
 
That board isnt much of an overclocker. Any particular reason you're going with micro ATX? If you stick with that board, you'll need the high multiplier of the E6600 or E4300 for overclocking. I think that board reaches around 300, so 9 * 300 = 2.7Ghz. So you probably don't even need a 3rd party HSF. The stock Intel should do fine.

http://www.hardforum.com/showthread.php?t=1101150

With that case, you'll need to find some good 80mm fans. You might want to get a fan controller, too, since 80mm fans can get quite loud.
 
The CPU is being ripped out of a Dell, so that is what I will have to go with and is also the reason I will need a heatsink fan.

No huge plans to overclock but but like to try to push it a little.

Micro case because space is very limited. I picked the case because it seems to have the best cooling out of any case in its size range.
 
Since you're planning on overclocking why not get an E6300 or E6400, or even the E4300. The tuniq tower may be a better option for a CPU cooler, i'm not sure if that will be too big for your case, though; it probably won't be a problem. If you want to save some extra cash, the onboard sound on the motherboard would probably be fine for an average user's needs, are you planning on doing much audio-intensive tasks?

Not doing audio intensive tasks but it would be very helpful to have an optical input option so I can plug my PS3 in and use the 5.1 speakers. Other than that no I don't do intensive audio work.

But I do like having the ability to change cut off frequency to the sub, something I have not been able to do with integrated audio in the past.

My thoughts for the 80 mm fans

What I am thinking of for the 120mm fan

CPU heatsink fan

If using a fan controller would it be smart to buy the loudest most powerful fans I can find because I would be able to turn them down anyway?
 
If using a fan controller would it be smart to buy the loudest most powerful fans I can find because I would be able to turn them down anyway?

I wouldn't try to buy loud fans, just buy some powerful fans with high cfm ratings, and if they're too loud then you can always lower the RPM a little.
 
Back
Top