CMOS Checksum error

Tullphan

Limp Gawd
Joined
Mar 24, 2006
Messages
319
I'm working on a friends pc.
I replaced the PSU on it and now when it boots up I get a CMOS Checksum error.
I press F1 to continue but it seems like it's not recognizing the keyboard...whether I use a PS/2 or USB.
I popped out the CMOS battery for a couple of minutes & tried again, but I get the same message.
I tested the battery with a voltmeter & it's showing 3.0xx volts. I put in another battery from a newer pc (showed 3.1xx volts) & I still get the same message.
None of the hardware has been changed except for the PSU.
The motherboard in question is an Abit IS7 that's about 5-6 years old.
Ideas?
Thanks in advance.
 
you can also try taking the cmos battery out and booting, then shut down and replace battery. give it ago let me know how it turns out.
 
like lenoix had said before it might be the cpu if you have one to replace try that. also try removing ram, video card, ex.... one at i time to see if anything may be faulty.
 
All you should have to do is press delete, enter the bios, press F10, then reboot and it should be fine.
 
Back
Top