• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

CMII

P

PcJunkie209

Limp Gawd
Joined
Apr 20, 2011
Messages
158
Hello guys and gals here is my newest mod that I have been working on.
The following sponsors were in involved-
Gigabyte
Cooler Master
Koolance
Kingston
AMD

Here is the parts lineup-

CM Cosmos II
CM Silent Pro Hybrid 1050 watt psu
CM fans throughout the case
Gigabyte 990FXA-UD7
Gigabyte 7970 x2 ( pending arrival )
AMD FX8120 8 core cpu
AMD 16gb ( 4 x 4gb- 1600mhz ) memory
Kingston HyperX 120gb SSD's in raid 0

Koolance parts-
RP-401X2 Single 5.25in Reservoir Rev.1.1
CPU-370
Radiator, 3x120mm 30-FPI Copper
Pump, PMP-400
6- Compression fittings [For ID: 13mm (1/2in), OD: 19mm (3/4in)]
2- 90` elbows
clear coolant

MasterKleer purple tubing

MDPC purple, white and black sleeving.

Enjoy some pics. This mod will be at CES with Gigabyte for demo.

case and parts



Ok so lets tear this baby down


possibilities for two 240 rads where HD's are at


Thats it for this post i'll do another in a bit.
 
Last edited:
Ok here's some more pics. some paint and a window.

a little white to bring out the CM emblem


now the door I had to heat it up some to get the glue to release the aluminum from the plastic. so here's the window prep and getting cut.


So here is the window and I added some white stripes on both panels.


Here's some color. just a little :)

Thanks for looking more coming................
 
Ok so some psu time.... Before...


After....


some more paint...


and motherboard with Koolance 370 block...


installed and adding some tubing...

thats it for tonite i'll finish uploading pics morrow.... until then enjoy and thanks for looking! :)
 
Hello again everybody! This should be the final pics for my work log. I will upload some pics from CES where it is headed Monday.

here is the pump...

and here is where the fun starts....... the wires...


The two HyperX SSD's in raid 0.......


and here's what it will look like with dual GPU's..... didn't have the 7970's yet so I used my 480's for pic... :)


And here it is ready for CES....



Thanks for looking at my work. I'll be doing another real soon but will get a little more involved since there will not be any time restraints. Until then...........
 
You must log in or register to reply here.
Back
Top