Clawhammers not as good for OCing?

dabiggoober

Limp Gawd
Joined
Feb 27, 2004
Messages
202
I have a 3400+ clawhammer core. (1mb L2 cache) 754 socket on a DFI lanparty UT.

It runs perfectly stable at 232x10.5=2436 herz with only 1.55 vcore and that's where I run it normally.

I have a great XP90 on it that keeps it nice and cool.

I have good memory (xms 2,2,2,5) that will pull 260 and be memtest stable for an overnight run. But I can NOT get my core prime stable at anything over about 2480mherz.

I've gotten a boot into windows at 2.58 gherz but not prime stable. And at even 2.5 it doesn't matter how much I dump into the vcore, its not prime stable, even though it will take 1.75 volts no problem and keep temps below 50.

I have the sata raptor on 3 and have tried 4 to no avail.

Any thoughts? Is this just not a good OC proc or did I just not get a great one.

Anyone else have better luck on air with the clawhammer core?
 
do you have your AGP speed set to 67 to activate the lock?

it should be the option right under the FSB under genie bios...
 
4b5eN+EE said:
do you have your AGP speed set to 67 to activate the lock?

it should be the option right under the FSB under genie bios...

It was set to 66. There is no automatic. I assumed 66 locked to 66. Does it need 67?
 
okay. Just did that and am still getting 5000 errors on test 5 at the 95% mark. That's better than before when it got 1000000 and never finished test
 
ahh! I'm confusing two issues. I bought gskill ram that is failing test 5 and was referring to that in my last post. Arg!
 
I've tried keeping my AGP frequency at 66Hz while overclocking (on socket 754, board in sig) and it still seems locked there....I think the socket 939's need that (MSI K8N Neo2 Plat). Either way, it's at least worth a try....and no, Clawhammer's don't overclock nearly as well as newcastles, or winny's. Also, the CG revision's overclock a little better, and I think C0 was the first series, which don't overclock well at all. I've been able to bench my 3400+ at 2.5GHz (see AM3 score) but I diddn't check for Prime stabability....just dumped crazy voltage into it and ran the test, then took the voltage off. I can prime at 2.4GHz @ 1.65v but it wants more at 2.42GHz. So, it's your CPU not any settings, sorry to say.
 
Back
Top