check my setup?

[mode]

Swiftech MCR320
DDC-3.2/w top
Swiftech micro res
Masterkleer 7/16" ID tubing
D-tek fuzion

feel free to add any comments or suggestions.

 

[Xilikon]

What components are you trying to cool. For a cpu-only loop, your pick is top notch

 

[mode]

yep. only cpu right now. =)

later on i might add a gpu block.

 

[Xilikon]

To size the radiator correctly, if you are trying to add a quad core overclocked and a 8800GTX, the radiator might be a bit small but for anything under this, you are ok. If you wanted to get SLI, you need another radiator for sure.

This is just food for thoughts

 

[mode]

ima cooling an amd fx-60

no gpu yet until i get one.

i have 2 quick questions though.
1) Should the fans on the rad blow through or away from it? (I have a coolmaster evo 830 and im not sure where to put the rad)
2) For my coolant i am using a 1:10 dilution distilled water and pentosin. Anything else i should put into it? and what do i need to make it blue?

 

[Xilikon]

ima cooling an amd fx-60

no gpu yet until i get one.

i have 2 quick questions though.
1) Should the fans on the rad blow through or away from it? (I have a coolmaster evo 830 and im not sure where to put the rad)
2) For my coolant i am using a 1:10 dilution distilled water and pentosin. Anything else i should put into it? and what do i need to make it blue?

The Pentosin is what make it blue, albeit a light blue.

As for the fans, both is good but what matter the most is to bring the coldest air from outside across the radiator, not pull hot air from the case thru it.

 

[mode]

well in that case, ill just do a top mount. Or bottom, but idk how ill set up the fans on bottom.