Cheap Overclocking, they way it was...

Joined
Aug 13, 2004
Messages
38
Extreme OverClocking is nice, but some of us are a bit poor. I want to start this thread as the Cheap Ass Guide to OverClocking.

I currently have a MSI K8T-Neo2 939. I still use my AGP cart 95700 Ultra DDR3 got for free, don’t ask). Recently I was able to pick up a gig of generic RAM, low-end corsair stuff.

See, this is the thing, most of us can’t run out and buy the latest and greatest stuff. So the question is how do you tweak the stuff you can afford.

This is what true overclocking was all about in the old days, getting more bang for the buck. Now it has turned into a benchmark contest. Looking at a benchmark on a racked system cooled by NOX is useless.

What settings do you use? What tricks do you have. Do you care about noise?

I running a 3000+ at 2.24 stable using all stock stuff. I was able to reduce temps and tolerance by putting a Tornado to kick out hot ari at the top of the case. Once I did that I found I could kick the ram to 254 with a 5/6 ration and 4x HTT.

Loud, yes, but I see a great increase in performance.

Be cheap, be proud, tell us the small things give you great results.
 
I was running two sticks of PC3200 value select RAM, from different manufacturers, at 235MHz

3.0C @ 3.45C stable :D

Now i got some better RAM..but my PSU is holding me down..and I'm stick at 3.5 -_-
 
I believe for most overclocking is still about saving money. I mean who wouldnt want to take a $150 processor and make it perform like once twice as expensive or more.
 
thats the idea, I run a amd64 +2800 @ 2.5 because the chip was a grand total of 140 dollars in october. That is still pretty damn fast for a processor costing twice as much currently. I remember doing the same by buying the lowest speed proceesor of the most recent revision. the XP 1700 comes to mind as a screamer that would go an easy 500 mhz overclock also.
 
hell, i'm still running a 2400+ mobile (currently 2.3ghz... looking at getting it some more volts for its birthday:p) on an a7n8x deluxe. my video card (also oc'd... just not as much) is a 9700 Pro i got for $25 just recently (woot for friends upgrading) i've got 512 mb of OCZ "Premium" memory (really budget stuff - 2.5-3-3-7 pc3200) running at 166mhz (currently 2.5-3-3-7, but i had it at 2-2-2-5 until i tried to get the most from my cpu) it'll run the same clocks/timings/volts as my brother's pc3200LL corsair memory in his P4 system. it also cost 1/2 as much. works for me.

the upgrade i'm looking at now is a sempron 2800+ or so (s754) 90nm chip with some dfi nf3 loving. that way i get a new CPU/mobo (the a7n8x is getting old, and doesn't have gigE) and don't have to buy anything else (well, aside from a new PSU) so it'll be about $200 to upgrade. i may buy memory as well, just to have a gig. but we'll see about that later.

cheap ass overclocking is alive and well, but it doesn't get the glory that the big name guys do. the different methods are aimed at different things, anyways. they want to be the fastest in the world, because it is fun for them, and we want bang-for-the-buck, because it is fun*




* - and cheaper, too
 
rogue_jedi said:
hell, i'm still running a 2400+ mobile (currently 2.3ghz... looking at getting it some more volts for its birthday:p) on an a7n8x deluxe. my video card (also oc'd... just not as much) is a 9700 Pro i got for $25 just recently (woot for friends upgrading) i've got 512 mb of OCZ "Premium" memory (really budget stuff - 2.5-3-3-7 pc3200) running at 166mhz (currently 2.5-3-3-7, but i had it at 2-2-2-5 until i tried to get the most from my cpu) it'll run the same clocks/timings/volts as my brother's pc3200LL corsair memory in his P4 system. it also cost 1/2 as much. works for me.

the upgrade i'm looking at now is a sempron 2800+ or so (s754) 90nm chip with some dfi nf3 loving. that way i get a new CPU/mobo (the a7n8x is getting old, and doesn't have gigE) and don't have to buy anything else (well, aside from a new PSU) so it'll be about $200 to upgrade. i may buy memory as well, just to have a gig. but we'll see about that later.

cheap ass overclocking is alive and well, but it doesn't get the glory that the big name guys do. the different methods are aimed at different things, anyways. they want to be the fastest in the world, because it is fun for them, and we want bang-for-the-buck, because it is fun*




* - and cheaper, too

I was always for "bang-for-the-buck" now I'm all for buying the latest and greatest...
If you can't afford it, that's fine, if you can afford it, GO FOR IT!
 
I bought a Gigabyte rocket cooler pro (with the blinding blue LEDs). 76F Idle, 91F with CPU Burn in :). This is on a s939 90nM winchester 3000+.

47$ at newegg. 30C provides lots of overclocking room. I just need to stick a 30mm fan on my chipset.
 
I bought a vantec copperX from a local shop and it was a stupid move. Little did I know that the cooler would give the same temps as the stocker....
I spent 75 and bought some kinmax PC3700 and now at stock volts I run it at 160fsb 2-2-2-6.
It's too bad that my CPU and mobo suck, my mobo won't allow voltage changes, and my CPU is at its stabillity limit at 3150.
 
So I decided topull out my Jet Foot Socket 7 coller last night. Now the HS is still the stock AMD sink, but just putting on that cooler and jetting the hot air out toward the fan output rather then a general dissipation with a normal fan made a huge diff.

I was able to run 1 to 1 at 247 HTTx2. Ran Prime 95 in torture mode, Aquamark in a loop while ripping and burning a DVD. All done in 45, no blue screen or corruption on the DVD. The box is still goin on PRIME 16 hours after I left it.

28% OC using part from old OC's rigs is nice, it took a bit of thinking outside of the box, but my temps are down and stability is up.
 
you guys think you have it bad............
I have a t-bird 1.3 that IDLES at 58 celcius, last time I EVER let other people stuff generic fans in my case! I was only 11 when i got the computer, so I didn't build it, so the case is throwaway. I have 512 MB of micron ram, which is nowhere near slow, but half a gig of PC2100 at CL2.5 is no overclocker's pick, nd I cant afford anything new until my next system, cuz my parents arent putting anything into my old clunker. The graphics card is an SiS AG315(oh yeah, AGP 4x, try playing halo without being in safe mode on my computer, and you'll wanna replace it too) and the motherboard is a disgustingly low-performance shuttle AK32L. Show me a computer worse than that, and tell me you didn't pay anywhere near $700 for it! OC'ing this bad boy is almost outta the question
 
rimplestultskin said:
you guys think you have it bad............
I have a t-bird 1.3 that IDLES at 58 celcius, last time I EVER let other people stuff generic fans in my case! I was only 11 when i got the computer, so I didn't build it, so the case is throwaway. I have 512 MB of micron ram, which is nowhere near slow, but half a gig of PC2100 at CL2.5 is no overclocker's pick, nd I cant afford anything new until my next system, cuz my parents arent putting anything into my old clunker. The graphics card is an SiS AG315(oh yeah, AGP 4x, try playing halo without being in safe mode on my computer, and you'll wanna replace it too) and the motherboard is a disgustingly low-performance shuttle AK32L. Show me a computer worse than that, and tell me you didn't pay anywhere near $700 for it! OC'ing this bad boy is almost outta the question

System in my Sig was $648.

Lata.
 
Back
Top