Changing/Swapping/Installing new Capacitors

AmongTheChosenX

Supreme [H]ardness
2FA
Joined
Sep 24, 2007
Messages
7,305
Found a computer at work that we are tossing due to bad capacitors because my boss does not want to take time to fix it. it's a nice SLI Board maybe 4 years old, so I have been feeling inclined to take it and change the 3 bad capacitors that are on it. I know he is OK with this (One of those, "Hey if you can fix it, take it" situations. Cleared with him already)

I've seen guides on google/youtube on how people do it, but I want to hear it from the [H] crowd!

What are your thoughts/methods/procedures/guidelines for completing something like this?

Adam
 
I have done this. However I do have a degree in EE along with my CS degree. It's not that hard, Make sure you get the polarity correct and the voltage is the same or higher. I would stick to the same F rating. To unsolder I would get a solder sucker.

http://www.amazon.com/Parts-Express-Solder-Sucker/dp/B0002KRAAG

This will help at getting the solder out to make the old capacitors come out without having to heat the crap out of the board possibly damaging it..
 
Last edited:
As an Amazon Associate, HardForum may earn from qualifying purchases.
I know it ain't that hard for someone who as a bit of electronic know-how, but...

How do you test that this fix works? Because if you need to test it with a CPU... A CPU is a very pricy fuse to blow up...

Personnaly I wouldn't do it... I still, from time to time, blow up LEDs when I solder them.
 
I've done it, and I found that using desolder braid is easier than using the desolder gun, at least for a relatively unskilled individual like myself. You can get replacement caps from badcaps.net - good prices and shipping if you don't have local access.
 
Back
Top