Changed from ATI to NVidia and graphics suck

mt_100

Limp Gawd
Joined
Jan 15, 2006
Messages
342
I recently changed out my ATI 9600 Pro 256mb for an Apollo geForce 6800 128mb to get better performance and now I have graphic glitches in games.

Delta Force xTreme now has artifacts all over and strange shapes and colors, COD2 has a smoke like cloud where your players arms and weapon is suppossed to be and more.

I was hoping that switching from ATI to nVidia would get me better performance and quality would be the same, but what I got was more glitching than ever.

I have the latest drivers from nVidia'a site and no help. I am not overclocking or doing anything besides running everything stock.

Any ideas?
 
Did you use Driver Cleaner to get rid of all the old ATI drivers. Usually uninstalling them in the control panel doesnt do it. guru3d.com has driver cleaner 3 or you can google it. Once you have Driver Cleaner start Windows in safe mode and use the utility to unintsall any ati and nvidia drivers. Once your machine has no drivers installed, install the lastest Nvidia drivers.
 
You won't get more performance from an nVidia card than an ATI card, it just depends on what card you get from either one of the manufacturers ;)

You can get some sick deals on some X800 based cards in the Buy/Sell forum nowadays.
 
A geForce 6800 should be much faster than the 9600 Pro I had so there should be performace gained.

I will try the driver cleaner and see if that does the trick, was thinking it was driver related, thanks for the tip.
 
mt_100 said:
A geForce 6800 should be much faster than the 9600 Pro I had so there should be performace gained.

I will try the driver cleaner and see if that does the trick, was thinking it was driver related, thanks for the tip.
You completely missed the point of his post.

You do NOT gain performance just by switching manufacturers.
 
So throwing in the companies names and using "graphics sucks" probably wasn't the proper intro. Switched cards and now having glitches would probably sit better with the flag touting !!!!!!s, but I think he can still be offered advice.

Is this card used? My guesses are improper contact of cooling solution. I have also had weird anamolies driver related when switching manufacturerers. Try to start over again removing all bits and reinstalling Nv drivers. Or.... it might be the old "busted" card trick.
 
You are right, switching manufacturers will not gain performance. However if you read switching from an older ATI 9600 Pro to a newer geForce 6800 which is a higher performance GPU will gain performance.

The card was a refurb from Newegg and should be running fine. I did change out the stock heatsink and fan to an NV Silencer one and made sure that it was done with care and the heat compound was used correctly. Watching the temps during gaming shows that the temp of the GPU is not getting too high.

I think it may be a driver cleanup issue and will try the cleanup. Should I install the new drivers while in safe mode as well?
 
I've played that game on my laptop (6800go) and it ran flawlessly. I didn't like the game myself so I haven't played anything more than the demo--so I didn't patch it or anything like that. The point is, you should get very nice graphics with your upgrade-not worse with glitches.
 
mt_100 said:
You are right, switching manufacturers will not gain performance. However if you read switching from an older ATI 9600 Pro to a newer geForce 6800 which is a higher performance GPU will gain performance.

The card was a refurb from Newegg and should be running fine. I did change out the stock heatsink and fan to an NV Silencer one and made sure that it was done with care and the heat compound was used correctly. Watching the temps during gaming shows that the temp of the GPU is not getting too high.

I think it may be a driver cleanup issue and will try the cleanup. Should I install the new drivers while in safe mode as well?
Newegg's refurbs are hit and miss. Unfortunately you changed the cooler, so I don't know how that would affect the return policy for you to be able to exchange for another one.

See what happens with the driver cleanup. I'm willing to bet that the memory is hot. How is the contact between the NV Silencer and the memory?

Also, Apollo is a brand I'm not all to familiar with... What's their track record like?
 
Just tried the driver thing and it's still bad, glitches all over in the game.

Going to contact NewEgg and see what their return policy is. Too bad I am stuck with an NV Cooler I will no longer need, waste of $30.00

Going to put the 9600 in and probably buy an X1600 if they agree to return.
 
mt_100 said:
Just tried the driver thing and it's still bad, glitches all over in the game.

Going to contact NewEgg and see what their return policy is. Too bad I am stuck with an NV Cooler I will no longer need, waste of $30.00

Going to put the 9600 in and probably buy an X1600 if they agree to return.
The return policy on refurbed stuff is exchange only, I believe. You'll be getting another 6800 back.

I honestly believe your cooler isn't making contact with the RAM, which is causing the glitches.

Put the stock cooler back on and see how that works.
 
The cooler has pads on the bottom of the heatsink that make contact with the ram and all of them are touching.

I am wondering if it is a power supply issue since I am using and Antec Aria case that only has a 300w PS in it.

As of now I am back on the 9600 so I can play games without glitches. After trying the driver thing I opened COD2 and it was glitching even worse.
 
mt_100 said:
I am wondering if it is a power supply issue since I am using and Antec Aria case that only has a 300w PS in it.
That is a very good point. A point that will be an issue regardless of what higher end video card you get. The 9600 doesn't draw nearly that much.

If I were you, I'd upgrade your power supply. Get something good, like a Fortron/Sparkle with an FSP in the part number, or a Seasonics.
 
That in itself is the problem. My case is an Antec Aria with a propriatary PS in it that can't be upgraded that I know of.

I was hoping an X1600 wouldn'd draw a lot of power since it would give me better performance over the 9600. What are your thoughts?

I honestly think it is the power supply, going to plug it into brothers computer and make sure its ok and then sell it and the NV cooler with the stock heat sink as well.
 
mt_100 said:
That in itself is the problem. My case is an Antec Aria with a propriatary PS in it that can't be upgraded that I know of.

I was hoping an X1600 wouldn'd draw a lot of power since it would give me better performance over the 9600. What are your thoughts?

I honestly think it is the power supply, going to plug it into brothers computer and make sure its ok and then sell it and the NV cooler with the stock heat sink as well.
oooooooh... DOH! Hmmm... Definitely not a cased designed to house a gaming system. Hmmmm...
 
Happen to know what the power draw on an X1600 card is?

Looking at one of those.

I swapped the cooler and it still did it so I dropped it in my brothers machine and it worked fine. From that I can gather it is more than likely a PS issue. Hi PC was running ATI before and we just removed the drivers, changed the card, and installed the nVidia drivers and it worked fine.

I really like the Aria case. Hopefully a larger power supply comes out that will be able to handle the higher end cards when I want to go to a PCI-E setup.
 
Back
Top