Chaintech Nforce2 board died unnecessarily...

caitiff

Limp Gawd
Joined
Aug 22, 2000
Messages
280
I'm friggin PISSED! I bought a Chaintech mobo for my wife to run a little Duron 750 I had laying around. Pretty little board, fit in a spare case I had laying around, worked beautifully. Even let me overclock my Duron to it's personal best, just shy of a gig at 130Mhz FSB. The fan on the chipset was a little dinky thing, but it buzzed away happily for the whole time, till just the other day. It started making that noise that signifies EOL for a fan. Now I noticed that the hs was hot, but not crazy hot, so I waited a few days to replace the fan. We're talking less than a week, and the fan never stopped spinning. Yesterday the thing went belly up, no boot etc. I took the whole system apart, replacing EVERY component on it to test, no boot. I took off the pretty little gold tin foil hs/fan, and guess what I found? NOTHING! Not even cheap ass frag tape. I replaced the stock hs w/ a beefy fan, put on some AS paste, and MAN did that little hs do it's job then. You see the chipset would still heat up, but there was still no post action. For lack of a few pennies worth of grease, my board died. I would love to shove this thing up the A$$ of whoever made the decision to 'dry mount' my damn chipset cooler. ARRRGHHH!!!
Ok, I had to rant to someone. I'm sure a number of you guys have had the same experience by now. Have a good one! Anyone got a spare micro-ATX board they want to get rid of cheap? :)
 
Back
Top