• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Casters?

R

raksasas

Limp Gawd
2FA
Joined
Dec 14, 2002
Messages
477
I dont' know if this has been asked yet since the search is still off. and i don't feel like going through the mass amount of pages to find out.

Okay, I am looking to put casters on my computer case. Bigger the better. I have an Thermaltake full tower case. Basicly i wanna take off the case feet and replace them with casters.
 
Originally posted by raksasas
I dont' know if this has been asked yet since the search is still off. and i don't feel like going through the mass amount of pages to find out.

Okay, I am looking to put casters on my computer case. Bigger the better. I have an Thermaltake full tower case. Basicly i wanna take off the case feet and replace them with casters.
Click to expand...

Can I assume the question is where to get them? If not, what is the question? If so:

Just go down to your local hardware store and pick some up, places such as: Fleet farm, Menards, ect...

The bigger the better? You can get soe pretty big casters, so I'm thinking you are refering to the size of the case? I'm shure you could look around on froogle and come up with some online also.

But you can't just put them on where the little case feet were, you will most likely have to drill the mounting holes yourself, I did. Anything else?...later:)
 
Well you didn't really ask anything either, so I'll just go over the steps of putting on casters and hope that answers the question you were thinking.

1. get casters and nuts and bolts at hardware store
2. drill mounting holes in case
3. bolt the casters on

Good luck.
 
You must log in or register to reply here.
Back
Top