• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Caseless?

SolitaryTurnip

Weaksauce
Joined
Jun 17, 2005
Messages
73
Not exactly a case mod, but I figure that you guys would be the best to ask...

I have everything except the case for my new computer... and my case should get here in a week or so. I've put everything together to make sure that nothing is DOA, but I haven't had it turned on for any extended period of time. Is it at all safe to use a computer that's completely caseless?
 
yes, but you dont wanna keep it like that for too long. cardboard wont shiled your components from electro-magnetic noise, or ground it for that matter.
 
You can leave it going for prolonged periods of time...just make sure that there is nothing
creates a short on the bottom of the motherboard and hard drives.

You should search for the "Naked Computer" gallery.
 
I've got my motherboard sitting on the box it came in, but I don't know what to do with the hard drive. I think I have a drive cage from an old case, would it be safe just to mount it in there?
 
SolitaryTurnip said:
I've got my motherboard sitting on the box it came in, but I don't know what to do with the hard drive. I think I have a drive cage from an old case, would it be safe just to mount it in there?
You can put the HDD pretty much anywhere, as long it's either horizontal or vertical, and nothing is shorting out :)
 
SolitaryTurnip said:
I've got my motherboard sitting on the box it came in, but I don't know what to do with the hard drive. I think I have a drive cage from an old case, would it be safe just to mount it in there?
You could put the hard drive in the box but if it is closed then it might get a little hot.
 
You really dont have to worry to much. Just lay the mobo the antistatic bag it came in, and you will be all set. You could put a piece of cardboard under that. Everything else you can pretty much put anywhere.
 
Wish I had a camera, but a store that I work at fixing/building computers we have a testbed computer for components and the motherboard is mounted on a piece of wood with the foam piece that comes with mobo's inbetween the wood and the mb
 
mashie said:
Now that is actually a stupid idea. The whole purpose of antistatic bags IS to be conductive, the silver colour isn't there for looks it is a thin metal film.

i agree. the bags only work when the parts are inside. even if they did protect from static on the bottom leads, if there's not enough humidity, static will build on the surface by itself and short out. i donno why people take these risks with ESD all the time with these expensive parts.you dont have a case? get a case. or mod some metal box and mount it in there. the parts need to be grounded, and shilded. only reason those plastic cases work is because the plastic is conductive enough to ground the parts. at least that's what the macs have.
 
kuyaglen said:
You should search for the "Naked Computer" gallery.
You mean computer porn?

Computers dont really need to be sheiled from electromagnetic fields, but they do make quite a lot and will make it tough to listen to the radio. My wireless keyboard also will not work at all near the computer when the lid is off.

Just remeber, some parts of the computer wont get any air to them sitting out in the open. Hard drives, chipset...
 
Back
Top