• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Case LEDs Too Strong

V

Volume

2[H]4U
Joined
Jan 17, 2004
Messages
4,010
My case (in sig) has the strongest LEDs I've seen in any case. The power and hd status LEDs light up half my room at night, and picking something off the floor and having my eyes cross ways with them isn't the most pleasant thing.

Is there any relatively easy fix to dull them down a bit, or do I have to replace them completely?
 
you could also add a resistor in there. drop it drop it down to a lower voltage. course thats about as much work as replacing the thing. Putting a small bit of window tint on it may work too.
 
Sheldog23 said:
you could also add a resistor in there. drop it drop it down to a lower voltage. course thats about as much work as replacing the thing. Putting a small bit of window tint on it may work too.
Click to expand...
Or you could try drawing on the LED with a Sharpie:p
 
smash the damn thing, :p j/k just just sand it, easiest way, or stick some tape on it or something...
 
I use the sharpie method. That way if I ever need a strong LED for anything, I didn't ruin it. You just use a whiteout board marker and color on the sharpie and it will come out.
 
You must log in or register to reply here.
Back
Top