Card Reader Causes Boot to Hang

macrospect

[H]ard|Gawd
2FA
Joined
Nov 22, 2004
Messages
1,711
Hello,

I just flashed to the latest bios (0910) for my Asus P5B Deluxe board. I noticed that the card reader on my Canon Pixma MP600 printer was causing my entire system to hang when the BIOS tried to auto detect mass storage devices. Now, I have a card reader on my Epson R320 printer as well. That has no problem when the BIOS tries to detect it. I narrowed the problem down the the Canon printer (this only occurs when it is plugged in even if the Epson is unplugged). I thought it was a conflict at first but I was wrong.

So, I need some insight on this. Do some card readers just take a long time (~15 seconds) to detect? I am ready to rip the damn printer a part and remove the card reader all together. I have not once used one of those things. All they do is delay my boot process and add more useless devices to the device manager.

Any input is appreciated!

Thanks.
 
Have you messed with the USB settings in the bios ?

Detect/use USB legacy devices
USB keyboard support os/bios
USB Mouse support os/bios

Boot from other devices off

dont have that board so cant say exactly what they will say.
 
Thanks for the reply. No, I really did not mess with the USB settings. I did check them though. I have USB Legacy support enabled (which also takes care of my USB keyboard and mouse). I checked to see if there was a menu to tell the system to boot from the card reader (or any other USB devices) and found none.

Its strange that it is just this one card reader. Its ironic that this is also my newest printer.

I also tried a CMOS reset with no luck. It still hangs upon detection.

One thing I found odd was during detection it says:

Device #01: EPSON reader
Device #01: Canon

Maybe there is some kind of conflict. If there is I am not sure how I would resolve that one.

Lastly, the Canon printer causes Vista to slightly hang during boot. It works fine once I boot into the OS though. Perhaps I just have a really slow card reader?!
 
i have a intel badaxe2, and one of my hdd is usb, so the boot hangs for 15 secs before resuming.

theres an option in my bios regarding boot settings: boot from usb, or usb boot sequence...
disabled it and it worked.
 
Ok,

I think I figured the problem out. HUMAN ERROR!

I have 2 USB hubs daisy chained on my system. I accidentally hooked everything up to one hub and left the other empty. For some reason this causes detection to hang because it is looking for hardware but there is none there. Once I unplugged the second hub everything was running smoothly again.

Morale of story: Make sure your cables are tidy and labeled. I had the labeled but I put the labels on the wrong cables. Human error!

Thanks for the replies!
 
Back
Top