Cant seem to get ocing right

AliP

Limp Gawd
Joined
Oct 25, 2006
Messages
338
Quick specs: E6600+680i+Z9700+Ballistix Rated 1000mhz.

I'd like some info at what voltages should be set at, and i mean all of them, not just the cpu core, have never done this before so i dont know exacly what im doing but i get the basics i guess. Have the limiting options to off (stuff compiled from a few guides) , mem to linked, mem ratio 1:1, set memory to 800 (fsb=1333) (cpu=9x333=3Ghz) and i tweaked the votages a little but i dont think i got it right. When i started up windows the system frose after a few seconds at desktop. Please help, thanks. :confused:
 
I don't know much about the 680i and how the BIOS is but I can tell you my settings on the 650i (baby bro :cool: )

When I first started I had it @ 3.4ghz but it was unlinked so I didn't have the 1:1 ratio many people talk about...decided to do 1:1 so I can be like everyone else :p

I lowered my multi to 7 so I could get the required 1:1 ratio

Well here are my settings using a E6600 + 650i + Firestix

CPU voltage = 1.37
Memory voltage 2.08
Northbridge voltage 1.739

FSB = 475 (or 1900 as it says in the bios...1900/4 = 475x7 = 3.325)

Memory = 475 (x2) = 950 @ 4 4 4 12 2T

Don't know if that explains anything but those are my settings...what you should so is this

To get 1:1 you need your FSB to be 400 (400x4 = 1600 or 400x9 = 3600)
I don't know if you want to oc to 3.6ghz so lower your multi to 8

Put the FSB to 400 which will get you 3.2ghz (400x8 = 3200)
Memory should be running @ 400x2 = 800 so that's 1:1

Try to do this at the stock voltage (1.325). If it freezes go back and increase the voltage until it's stable
 
Thanks for the help, im guessing by 1:1 they actually ment sync mode, i was trying to run my memory at 1333 mhz :S anyway i got it stable, for now.... But i need a little more help as soon as possible, here take a look at this:

omgfirstocomgcz1.jpg


The mem volt is manually set according to specs, the cpu is set by your reccomended volt, but else is at auto, but its showing up red and giving me a scare, is this all ok? As you can see im running prime, isnt that a good stable testing program? Please Answer asap, before i loose courage and set it back in case im doing something wrong. Thanks! :D
 
Bump! Cmon Cmon, give me a response before i have a panic attack ;) Additionally, some programs tell me its running at 3600mhz but it is running at 3200?
 
Bump

Edit: Never mind found out some of those colors were normal and the others were fixed, thanks for the help suge.
 
Yeah that looks perfect.

So you've got it at 3.2ghz + a 1:1 ratio w/memory running at 800mhz?

Good job!
 
Back
Top