Neo_Cloud_99
Limp Gawd
- Joined
- Apr 18, 2001
- Messages
- 466
This is my brothers system and he lives in another state so I've been trying to help him over the phone with this stuff but we had no luck.
System Specs:
K8N Neo2 Platinum - BIOS 1.3
Winchester 3000+
XP-90 w/92mm Vantec Tornado
2x512 PC3200 OCZ EL Platinum Revision 2
PNY 6800GT
WD SATA 36GB Raptor
Enermax Noisetaker 470W
Ok so I've been doing some research and what I have found so far is that possibly Dimm slots 3&4 work better so his memory is in those slots. Use SATA ports 3&4 so we've done that. He has the 1.3 BIOS. Tried AGP Frequency of 66 and 67 both have same results. At default settings CPU temperature is around 39C in the BIOS. Not sure about PSU rails but I'm assuming they are ok. His system is 100% STABLE at default settings.
We did change the HT frequency to 4x instead of 5. I then had him lower the CPU ratio to 8x instead of 9. Raised Vdimm to 2.85. Left all memory timings to Auto. We tried FSB of 205 it seemed to work ok, 210 ok, 215 ok, 220 Windows starts to lock up during loading and if it does load it locks up or BSOD's before reaching the desktop.
We didnt run any benchmarks or tests with higher than 200 FSB so we arent even sure that was stable. I'm thinking we are missing something... I dont know all the variables because I'm not actually at the machine and from what I've read there are a ton of BIOS options.
Is the 1.3 BIOS not good for overclocking? Are there some BIOS settings we need to change before doing overclocking?
Thanks in advance.
System Specs:
K8N Neo2 Platinum - BIOS 1.3
Winchester 3000+
XP-90 w/92mm Vantec Tornado
2x512 PC3200 OCZ EL Platinum Revision 2
PNY 6800GT
WD SATA 36GB Raptor
Enermax Noisetaker 470W
Ok so I've been doing some research and what I have found so far is that possibly Dimm slots 3&4 work better so his memory is in those slots. Use SATA ports 3&4 so we've done that. He has the 1.3 BIOS. Tried AGP Frequency of 66 and 67 both have same results. At default settings CPU temperature is around 39C in the BIOS. Not sure about PSU rails but I'm assuming they are ok. His system is 100% STABLE at default settings.
We did change the HT frequency to 4x instead of 5. I then had him lower the CPU ratio to 8x instead of 9. Raised Vdimm to 2.85. Left all memory timings to Auto. We tried FSB of 205 it seemed to work ok, 210 ok, 215 ok, 220 Windows starts to lock up during loading and if it does load it locks up or BSOD's before reaching the desktop.
We didnt run any benchmarks or tests with higher than 200 FSB so we arent even sure that was stable. I'm thinking we are missing something... I dont know all the variables because I'm not actually at the machine and from what I've read there are a ton of BIOS options.
Is the 1.3 BIOS not good for overclocking? Are there some BIOS settings we need to change before doing overclocking?
Thanks in advance.