Can't get SATA RAID working...

HighwayAssassins

Supreme [H]ardness
Joined
Mar 2, 2004
Messages
5,210
Hey, I just bought a new 120 GB Maxtor HD and it arrived today. I slapped it in my computer and hooked it all up correctly, formatted it, and through windows i can copy files to and from it so i know it works.

I cant figgure out how to get RAID working. I enable it in bios, but then WinXP installer cant recognize any hard drives. When I push the F6 thing, all that happens is it asks me to incert a disk into A: (no disk ever came with my mobo) and on other forums people say that you dont even need to do the F6 thing...i suppose because the RAID driver is not 3rd party, its built right onto the southbridge.

Anyone know how to get RAID working on a P4P800-SE?

thanks.
 
Hi HighwayAssassins,

I have an ASUS P4C800 E Deluxe with on-board SATA RAID (Promise Chip). When enabled in the BIOS, the RAID should allow you to hit a key, or combination of keys to enter the RAID BIOS. Once in here you can set up the RAID array so it's ready to be formatted.

It's ideal to have 2 HDD's which are identical, means you'll have no issues. I'm using 2x WD Raptor 36GB HDD's in RAID 0 at the moment, works a treat.
 
Do you only have the one HDD?

Usually, if you add a drive to an existing drive, don't expect to be able to RAID without formatting. If the array is a new array, then yeah, you should be able to build it, and Windows should see it as a new array.

Additionally, RAID requires matching disks. Since you want to RAID with the 120, then, you'll need at least 1 more 120gb HDD to build the array.

What are the rest of your system specs?
 
I enabled the RAID in teh bios then pushed ctrl+I at the startup and the system raided teh 2 drives. they are identical. bios recognizes them i just cant get windows installer to see the disks! wtf?
 
HighwayAssassins said:
I enabled the RAID in teh bios then pushed ctrl+I at the startup and the system raided teh 2 drives. they are identical. bios recognizes them i just cant get windows installer to see the disks! wtf?

You need to use a RAID driver setup disk. When you first start the XP installer, you must hit F6 when it tells you to at the bottom of the screen to specify additional storage devices. After it loads some files it will prompt you to insert a floppy disk and then you need to choose the correct driver for the RAID controller. Then you proceed as normal.

And just incase you were wondering you MUST use a floppy. The installer is the same installer from Windows NT 3.1 Server (Yes I said NT 3.1 server, not NT 3.5). They've never updated the damn thing to speak of. So a floppy is your only choice.
 
My Motherboard didnt come with any raid drives also (or it it did I lost them), Well I used my friends motherboard cd (with Nforce 4 Raid Utility and copied the drivers on to a floppy and used that.. :)


BAH I hate floppys.. I had to borrow one from a friend 3 in the morning.. lol Now I just keep one around for bios flashes/raids... :)
 
Jasonx82 said:
My Motherboard didnt come with any raid drives also (or it it did I lost them), Well I used my friends motherboard cd (with Nforce 4 Raid Utility and copied the drivers on to a floppy and used that.. :)


BAH I hate floppys.. I had to borrow one from a friend 3 in the morning.. lol Now I just keep one around for bios flashes/raids... :)
yea I was just coming on here to say that although people online say they didnt need any disks, so i figgured i didnt either, but the manual says you need a disk...and fuck man, i aint got no floppy drive! god damnit....
 
Not sure on your SE, but I have the P4P800 Deluxe, and if you read the instructions it tells you you have to take the motherboard CD, and make a driver disk from it with the SATA RAID drivers. Mine were ICH5R drivers if i remember right, not the VIA, so make sure you dont try copying the VIA drivers, as they wont work with SATA, only IDE. At work so i dont have the Motherboard CD handy, but i believe there was even an executable that made the disk for you. After you get the right RAID driver, you just hit F6, load the driver from the floppy and you are set. As for lack of a floppy drive, borrow one from a friend's computer? I had mine just hanging there, so i could unplug it as soon as install was done.
 
Nizari said:
Not sure on your SE, but I have the P4P800 Deluxe, and if you read the instructions it tells you you have to take the motherboard CD, and make a driver disk from it with the SATA RAID drivers. Mine were ICH5R drivers if i remember right, not the VIA, so make sure you dont try copying the VIA drivers, as they wont work with SATA, only IDE. At work so i dont have the Motherboard CD handy, but i believe there was even an executable that made the disk for you. After you get the right RAID driver, you just hit F6, load the driver from the floppy and you are set. As for lack of a floppy drive, borrow one from a friend's computer? I had mine just hanging there, so i could unplug it as soon as install was done.

All that said, for your own sake, seriously consider just sticking to 2 drives, one with system files, one with games/etc or however you want it organized. Plenty of information on benefits, or lack thereof, for RAID 0 (which I am guessing you were going for) in the Disk Storage forum, along with a post that had a similar problem to this a while back.

Few motherboard makers actually give you the disk. Most of them make you create them from a disk.
 
Back
Top