Cant get past POST

Rishy

Gawd
Joined
Jan 15, 2006
Messages
540
A friend of mine's PC just died one day....hit the power button and zip happens..

Replaced the PSU...powers up...but on the POST get a Cheksum error's - Default loaded ... Hit F1 to continue bla bla...and thats it...also theres a sounds comes up after the initial BEEP...its a sounds like a one of the cables is hitting the spinning fan...best way i can describe it...

Tried resetting the BIOS also no go....

Also, SOMETIMES it would get to the Boot choices....where you choose between safe mode and all that...but at that screen the keyboard doesnt work...so wait for the countdown...screen goes blank and it reboots again...

Running a 430W CM PSU...1GB Corsair...1 250 IDE and 1 400 SATA...im not sure what card cos its got a huge HSF on it...not sure what proc..an Intel....boards is Abit IC7 Max3...on XP...

Any ideas ?
 
unplug all drives, and try it with a single stick of ram. If it posts, shutdown, plugin a floppy or optical drive, and boot into memtest. Try another PSU if you can.
 
Back
Top