Can't get over 3.0ghz on DFI 650i board with 2180

A

ashblk

Weaksauce
Joined
Feb 17, 2008
Messages
69
Timing is set at 5-5-5-15

Vcore is set at1.34

FSB is bumped up to 1200.

I get blue screens and constant restart and system failure on anything over 3.0ghz. I was wondering if the chipset that's the issue here.

I know this chipset isn't that great.

Memory is set to 800mhz.
 
Mine is actually running @3.08, voltage@stock, fsb 385. When`ll be back home, i`ll try higher voltage. Try to lower fsb or put divider on ram
 
my e2180 fell flat on it's face after 2.95ghz (stock voltage). I assumed getting an oc like that on stock volts would merit a higher clock w/ additional volts but, I was wrong.. No extra voltage would help it out. Even running up to 1.6v. It's a common problem. I've seen plenty of others that have had this very same problem
 
had a 2140 that 100% overclocked to 3.2 with 1.4 volts and stayed nice and cool. 1.4 should fix ya up.
 
the e2140's or e2200's seem to do well. I was hoping for a 100% oc but it didn't happen.
 
You must log in or register to reply here.
Back
Top