Can't find culprit of 100% CPU on AP1142N

[4GSam]

My CIsco LAP 1142N running in autonomous mode is reporting constant 100% CPU usage. It seems to work fine, though the other night I got home and it wouldn't let anything connect to its SSID (reboot fixed it)

Here is a log of what's running:

https://dl.dropboxusercontent.com/u/121069/Public Images/comcast/cisco-output.txt

This is my first time using a Cisco AP. I upgraded the firmware to the latest release and it's still at 100%. Any ideas?

 

[Sinclair]

Offhand I can't see anything there using virtually any CPU. Is this by chance hooked up to a switch with other VLANs on it that aren't being pruned from the AP's port? Or is there a loopback interface configured on the AP?

What does "show log" show?

 

[4GSam]

No loopback. It's running off an older 2950 switch. I only have two VLANs on the whole network, one of which is VLAN 1.

Does PoE make a difference? It's running off a TP-Link 802.3af adapter

 

[4GSam]

Offhand I can't see anything there using virtually any CPU. Is this by chance hooked up to a switch with other VLANs on it that aren't being pruned from the AP's port? Or is there a loopback interface configured on the AP?

What does "show log" show?

This is pretty much all the event log shows.

cisco-ap>show evtlog 10
Current evtlog contents:
Sep 6 11:59:21.051: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:01:21.063: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:02:21.065: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:12:23.987: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:14:21.129: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:16:21.134: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:22:23.424: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:22:33.987: %DOT11-4-MAXRETRIES: Packet to client 0022.4c00.d782 reached max retries, removing the client
Sep 6 12:27:21.183: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
Sep 6 12:32:21.206: %EVT-4-WRN: d0: Prevented attempt to enable beacons by non-driver process pid(57)
*** End of last 10 lines from evtlog ***
cisco-ap>