Cannot boot after BIOS upgrade

pdinc

Limp Gawd
Joined
Dec 19, 2006
Messages
425
Situation: I have a desktop with a Asrock Extreme4 motherboard. I recently upgraded to an R9 280, but was having detection issues. In order to solve said detection issues, I upgraded from BIOS v2.40 to BIOS v2.90

Issue: Since the BIOS upgrade, Windows 7 does not boot.

Steps taken:
1. Disabled all other HDDs/ODDs in boot menu from startup list
2. Attempted fixboot/fixbcd using windows 7 install disk repair console
3. Attempted startup repair. Startup repair reports no issues found.

There is only one OS on this desktop. R9 280 detection issues were due to unplugged power connector, not BIOS - so that is working now but I can't boot into Windows.

Can anyone help?
 
Check that the drives aren't set to ide mode in the bios. If you installed windows in ACHI mode a bios flash would have reset everything and IDE is probably default.
 
Already checked that, sorry - should have mentioned. Tried other forums and didnt get help, so just ended up reinstalling.
 
Back
Top