Can you run a computer without a video card?

KaptainBlaZzed

Limp Gawd
Joined
Jan 12, 2005
Messages
493
just like the title says. I would like to know?

I am setting up a farm of servers and do not want to put a video card in every one, if i can just move one around when needed.

I would just remote into the onther computers, no need for a monitor.

thanks.

Folding@home Real Time Farm Progress
 
yea, i dont see why that wouldnt work.
just use one card to install windows and whatnot, set the servers up, shut down, take out card, start up, and then remote. (make sure remote works before takin out the card ;) ) and you should be all set. just do that using that one card for all of the servers.
 
Will a system post without a video card in it? I know my Asus wont, but server boards may be different.
 
AuroraProject said:
Will a system post without a video card in it? I know my Asus wont, but server boards may be different.
ive never tested it, but im just assuming that it would work. i dont see why it wouldnt.
 
the system will not POST without some type of video in it....at least on board. It is an essential to the system. CPU, RAM, Video. w/o one of those key components, you will get no POST.
 
darknite said:
the system will not POST without some type of video in it....at least on board. It is an essential to the system. CPU, RAM, Video. w/o one of those key components, you will get no POST.

I believe this is universally correct.
 
darknite said:
the system will not POST without some type of video in it....at least on board. It is an essential to the system. CPU, RAM, Video. w/o one of those key components, you will get no POST.

exactly right.
 
I currently run 2 headless computers, one running Windows 2003 server and one with Windows XP. And yes, it does matter what OS you have. Anything before Windows XP will not boot. Any motherboard in the past 3-4 years should handle it just fine.

And no, I don't have server boards either. One is an Intel 865PE board and the other is running a 845 board with a 1.6P4. Just set up windows with the monitor and turn on remote desktop and you should be just fine.

Vlad
 
Vladimir said:
I currently run 2 headless computers, one running Windows 2003 server and one with Windows XP. And yes, it does matter what OS you have. Anything before Windows XP will not boot. Any motherboard in the past 3-4 years should handle it just fine.

And no, I don't have server boards either. One is an Intel 865PE board and the other is running a 845 board with a 1.6P4. Just set up windows with the monitor and turn on remote desktop and you should be just fine.

Vlad

huh... ok, I run headless systems also, but they all do have a video card... I don't use it, but it's there... there was a big problem about not having a keyboard connected during boot, but that has definitely been solved in modern mobos... but I thought they still needed a video card... but things are a changing. :)
 
nforce-2 motherboards will not boot , most i865/i875 mobos should boot, if you got a i845 you prob have on board video anyhow, but a poster above me confirmed it working, so it seems that most intel chipsets boot headless, but def not nforce-2

add i875 to the list of headless boot(done it a few times) but i do have halt on no errors turned on in the bios, perhaps its ignoring the fact that there is no video and continueing to boot
 
ONE WORD.....I MEAN TWO....

ONBOARD VIDEO.

If your motherboard has ONBOARD VIDEO, you don't need a video card. It might go slower when trying to show things, but if you are using it for a server, I am pretty sure you will be fine. Check for onboard video when you buy the motherboard.
 
dont take this wrong but like above...the os means nothing for the post.
You do not need a hdd to get a POST out of a board.
My suggestion is to get a few boards and just try it out. Get them with onboard video. They are cheap. Or install the os and take out the vid card (on a board w/o onboard) and see what happens.. I mean trial and error you know.. Best way to learn stuff.
I'm not real sure ive seen any i865/i875 boards, ive seen so many boards its not even funny. Not saying im all that or anything, cuz im not.
 
Heh, the old admins at the ISP I work for are blind. They had several Unix servers running without any graphics cards and used some sort of audio output interface instead. Since they were running the show, they figured we wouldn't need video output...

I think server motherboards will boot without video, and I know Unix will. That said, I couldn't say anything about a mainstream motherboard/OS, but it should be theoretically possible!
 
In most instances Video, CPU, and Memory are essential for completing the POST cycle. It all depends on the motherboard, as stated earlier, the OS is irrelevant for POST. POST occurs within the first 5 seconds (generally less) of the system being initialized, and verifies the CPU, Memory, and Video to be working properly. After that it is handed off to the BIOS where the rest of the motherboard initialization and testing occurs (where you see various hardware failures, i.e. "floppy drive fail").

I would suggest doing your research on the board you choose first, and using motherboards with onboard video if possible, otherwise you will need to find a cheap video card to throw in all of them. Just out of curiousity, what are the specs of the farm you're going to build?
 
Just to clarify my earlier post. Neither of my machines have either onboard video or a video card. I had a video card in it to install windows and set it up, but just took the card out and booted it.

Also, as I said, Windows 2000 would not allow either machine to boot and the only windows OS's that run completely headless are Windows XP or later.
 
I have some older MSI boards ( i can't remember what model, but they are socket370 systems) that I am running headless. I just had to go into the bios and set them up to ignore any errors durring post, then pulled the video card out. These are running server 2003...
 
I've unplugged my video card and heard the POST beep and heard the windows jingle on the bootup.
 
There's an option in the bios, "Halt on all errors" or something similar with a yes/no option. Sometimes it's a "Halt on:" and the options are "Keyboard, Keyboard/Video, Video, None"

Set this option accordingly to have the system boot even without a video card and/or keyboard. If your motherboard doesn't list the option in the bios, check your manual for more information.

90% of the people in this thread do not have a clue what they're talking about.
 
the ic7 has it, one of the many reasons its one of the best mobos ever made
 
syukton said:
There's an option in the bios, "Halt on all errors" or something similar with a yes/no option. Sometimes it's a "Halt on:" and the options are "Keyboard, Keyboard/Video, Video, None"

Set this option accordingly to have the system boot even without a video card and/or keyboard. If your motherboard doesn't list the option in the bios, check your manual for more information.

90% of the people in this thread do not have a clue what they're talking about.


i know exactly what im talking about...... :rolleyes: ....but hey...if yall can get them to work without video then obviously it works on some boards....but not all boards will do it.....like dude said b4...research your board b4 u buy
 
I just tried going headless on my old Intel 820 motherboard and it worked as well. So, far, I haven't heard of an Intel chipset based motherboard that this doesn't work on. I don't have anything older than this machine, but most people are running faster machines than a 800 MHz machine anyway.

Maybe VIA doesn't support this or something, but it seems Intel has long supported it, even before Windows supported it.

Vlad
 
ryuji said:
the ic7 has it, one of the many reasons its one of the best mobos ever made

yeah i was able to boot in on my ic7-g without my videocard plugged in... haven't tried on my dfi ultra-d though
 
Back
Top