• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Can this go higher???????

C

computerdude

Gawd
Joined
Jul 14, 2005
Messages
738
I got my 3500+ up to 2.6 stable. Need to know if I can go higher and what settings I need to do this? Thanks

My settings now

10x260fsb

Ram 150mhz(195mhz at post)

HT 3x

vcore 1.5+
 
lower the multiplier and raise the FSB as high as itll go (lowering the multi so you never hit your max speed)

this will tell you your motherboard limitation

have you figured out your max ram speed to make sure that isnt a problem (150mhz is your divider im assuming, not your actual ram speed)

Your OC looks pretty good though, so I wouldnt complain too much :cool:
 
Check your temps. If they seem safe to you, go ahead and dial up the voltage a little more and see what you can squeeze out of it.
 
I now have my 3200 Winchester up to 2,600ghz prime stable but its taken 1.65v to do so. My full load temps are now around the 44-47 range, I would think you should be able to put a little more voltage towards that guy....
 
You must log in or register to reply here.
Back
Top