Can nVidia RAID handle two (or more arrays)?

mavalpha

[H]F Junkie
Joined
Jan 3, 2005
Messages
10,448
I just got an interesting request for a build- he's looking to build a home workstation with the following:
2x 500, RAID0 for the OS
1x Raptor X for swap
2x 1TB, RAID1 for data

Can the nVidia 780i handle all of this natively, or would an add-in card be required for part of it?
 
If the 780i is anything like the 680i then it will work. I had a similar configuration. 2x500GB for data, 2X74GB raptors for OS and two ports not assigned to any arrays with one of the free ones assigned to eSATA.

When you enable the SATA ports as RAID another BIOS screen appears after the post screen and you can enter that config utility to create your arrays.

I've since changed my config and I have one array of 2X500GB for data, one 150GB raptor for the OS and apps, one 74GB for the swap, %temp% and user temp folders and one 74GB for games and misc programs.
 
I have a 780i and it will handle exactly what you want.
I have 2 in raid 1 for OS and 4 in raid 0 for apps
 
Thanks, I figured as much but wanted to confirm.

As a secondary question, will a degraded RAID5 (again, 780i) be accessible- albeit with a performance penalty? Or will the whole array be taken offline until the missing drive is rebuilt?
 
Sounds like a terrible setup: RAID0 for the OS and boot drive? Why? Wouldn't you be better off with RAID1?

I'd get an add-in card for your setup just because the nVIDIA drivers and utilities stink. They're not meant for serious usage, and if you're betting lots of data on this setup, you want stuff that you know will work well.

Anyway, yes: if you lose a single drive in a RAID5 set, it should continue working. It's not diminished for performance -- it's just diminished for redundancy.
 
Not quite sure why he wanted it set up this way, but he knew his stuff- if he said it was better in his setup, I wasn't going to question. I was trying to convince him to go 4x500 RAID5 to replace the 2x1TB RAID1, and he was interested until one of my co-workers mentioned hearing that NVRaid takes down the array when a RAID5 loses its parity capability. I couldn't believe it, nor could I even understand the logic, but it was enough to scare him away.
 
Back
Top