• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

can i upgrade my cpu?

B

Bleedblue12345

[H]ard|Gawd
Joined
Nov 1, 2004
Messages
1,942
I have a gateway comp.... it comes with a p4 2.0ghz northwood but heres the problem.... its only 400mhz fsb.. i was wondering a if it can support 80mhz fsb or 5-- fsb.... thx
 
I'm sorry, but most Gateway motherboards were manufactured by Intel. And at the time of the 2.0A P4 (400FSB), the stock Gateway motherboard is permanently fixed at 400FSB. Thus, if you try to put a 3.2GHz 800FSB Northwood on that mobo, you'll end up running that CPU at only 1.6GHz - if that system of yours even boots up at all with that "3.2GHz" CPU.
 
It won't likely even boot. HT was added to the 800MHz FSB parts, and voltage/thermal specs changed from 400FSB chips to 800FSB chips.

A Prescott likely would fry if you put it on that board. As the Prescott won't take kindly to 1.5 or 1.6 volts.
 
You must log in or register to reply here.
Back
Top