can i rma my mobo?

d0pe

n00b
Joined
Apr 27, 2003
Messages
34
ok i have a nf7s v1 that just seemed to die on me

i was saveing some changes in the bios and at the screen that says "dont restart bios is saving changes" i heard some type of a pop and it shut down

when i started it back up i had no video so i took it all apart and put it back to gether and still no video i know its the mobo for sure...

i dont have my receipt or anything, think i could still rma it?

if i can what WOULD i need? and how would i go about this?

any other advice would be great, THANX
 
It depends on how old the motherboard is.

Abit kind of recently established a 3 year motherboard warranty in light of the capacitor fluid scandal in the industry.

You can now RMA their boards through their website. If you don't have a receipt, they'll determine the manufacturing date of the mobo through the serial number or something, and it'll tell you if it can be RMAed.

www.abit-usa.com
 
Thats a common bug for the NF2 class boards, especially the first generation, that can be remedyed in a few ways (that doesn't require RMA).

1. Reset the CMOS via jumper and then hold the insert key while you power the unit up. The insert key step is specific to the NF2 chipset.

2. Drop in a 100FSB class default processor. This will generally bring the board back up- so any "B" stepping Thunderbird, Spitfire or Morgan core Duron should do the trick.
 
1. Reset the CMOS via jumper and then hold the insert key while you power the unit up. The insert key step is specific to the NF2 chipset.

2. Drop in a 100FSB class default processor. This will generally bring the board back up- so any "B" stepping Thunderbird, Spitfire or Morgan core Duron should do the trick.
Does that "cure" the problem, or is it just a temporary fix which you will have to repeat?
Just curious in case mine gets flaky. Thanks.
 
The two ways of fixing it will cure the problem until it happens again. They only way for a permenant fix is to get a new revision board, which will have the proper hardware implementation of some jumpers as required by nVidia- the whole problem happened when jumpers were left off the board to cut costs by several manufacturers.

However, you'd have just as permenant of a fix with RMA'ing the board- they would just reflash your BIOS, or do the exact same thing that i'm reccomending...

Oh yeah.. a third option: find a friend with identical board. Borrow his bios chip. Place in your computer. Boot. Remove his bios chip. Put yours back in. Flash. Profit.

One of the first two methods should do the trick.... let me know how it goes.
 
Back
Top