Can I implement RAID after one hard drive is filled?

YamahaAlex37

[H]ard|Gawd
Joined
Jun 23, 2005
Messages
1,775
I currently have one Samsung Spinpoint F3 1TB, and it's almost full so I was considering purchasing another of the same drive. I would like to use RAID 0 for the performance increase, and I was wondering if I would I need to wipe my first drive so that both drives are empty and then install Windows?
 
OK so basically Windows will need to be re-installed and half will be on each drive?

I also have two WD Blue 7200RPM 500GB drives. Is it possible to Raid 0 these and Raid 1 that with the F3 1TB? Does that sound like a better idea?
 
You can, but I wouldnt recomend it. Plus if u are using an onboard controller it may not support raid0+1. It will more likely than not be a hassle. HDs are cheap these days, the samsung F4 2TBs are on sale right now for 79.99 on the egg. Get 2, put them in Raid 1, and for $160 u have more space plus peace of mind.
 
you don't want to mix different drive types/speeds in a raid array. raid-0'ing 2x 500gb drives to get 1tb and then raid-1ing that to another physical 1tb defeats the purpose. Not to mentiont hat the controller likely won't let you do it, at all.
 
You can, but I wouldnt recomend it. Plus if u are using an onboard controller it may not support raid0+1. It will more likely than not be a hassle. HDs are cheap these days, the samsung F4 2TBs are on sale right now for 79.99 on the egg. Get 2, put them in Raid 1, and for $160 u have more space plus peace of mind.

I don't want to use 5900RPM drives for my OS, is that what you mean? I think I may just Raid 0 the WD Blue's and use the 1TB in my server for backing up important files OR get another 1TB and Raid 0 and use the WD Blue's in my server for backup.
 
Back
Top