Can I build this system for under 1k?

Headbust

[H]ard|Gawd
Joined
Oct 10, 2003
Messages
1,585
P4 3.0 or 3.2ghz/800fsb
60 gig or above 10,000rpm HD(15k?)
Windows XP Home/media/pro
DVD/CD - RW
DVD-ROM
Case would be around $100
PSU would be antec 400watt smartpower
Video would be el cheapo nvidia G4 card for now
512 of DDR at 400mhz

If yes help ..plz..k thanks
 
closest you're gonna get on the hard drive is SATA western digital raptor (10k), 74.something GB. It runs about 300ish. Justifiable? meh. i haven't used one. but i can say my 320GB hard drive for $260 is shit fast :-D.
it's doable if you get something more like a 2.6C and overclock it to 3, and you don't get a raptor, and you don't support a corporation with money to burn.........twice.
 
Im gonna go with the 3ghz for $272. I just need a mobo to go with it now, the way its looking right now i should be able to do this system right around $1000, well maybe not with 10k HD. I never got into HD stuff but whats the difference between serial and ultra, something along those lines.
 
right now, the only major difference is the ease and simplicity of SATA. As the format matures, it will fully replace Ultra ATA 133. It has the potential to be much faster too. Ways it's better: burst read speeds can reach 150MB/s (instead of 100MB/s). but ofcourse, without raid or 10k rpm drives, these speeds aren't usually reached. SATA only has 7 pins on it - the cable is atmost 1/4" wide, instead of the near 2" for IDE cables. There are no jumpers to worry about, it's just plugin and work. The cables can be up to about 3 feet long - great for full towers.
The raptors are great if you do a lot of digital video editing (with constant hard drive seeks, reads and writes). If you've got money to spare, they are also wonderful to put the system files on as they will load faster (esp if it's a large file).

for you? you'll won't notice any difference between the 2 technologies. But if you have 2 or more cd drives, it would be beneficial to get a SATA hard drive so that all 3 drives run at their best speeds without interference.
 
I don't think you would have any problem putting together very close to that system for right at or just under $1000. Unless you plan on buying the best version of everything I think you can get quality components and not worry too much about going way over budget. Here is just one example.

ANTEC Performance Plus Case, Model "PLUS1080AMG" -RETAIL
$114 with PSU

Abit IS7 motherboard $98.99

POWERCOLOR RADEON 9600PRO 128MB Vid Card $138

Intel Pentium 4/ 3.0C GHz $279 (though I would seriously consider either a 2.6 or a 2.8 and then do a slight overclock to get it up to 3.0 or 3.2).

Corsair XMS Extreme Memory Speed Series 184 Pin 512MB DDR PC-3200 $108

Western Digital Special Edition 80GB 7200RPM IDE Hard Drive $72 (here I would not bother with the 10000k rpm drive unless you really need it, also I would look at a store like Best Buy etc. and buy with rebate for less)

Lite On 48x24x48x16 Combo Drive $49

LITE-ON 16X DVDROM $32 (though I would seriously consider a DVD RW instead)

XP home $91 with purchase of hardware at newegg

My total was $981.99 and the only difference is you did not get the 10k rpm hard drive, but you got good memory and a much better vid card. Pick and choose which is more important to you and what you do, but I think this shows it can easily be done around $1000.00 without monitor.
 
Im not limited to $1000. I could actually spend $1500, but at the most i really only wanna spend around $1300(Including monitor which would be a viewsonic 17" or 18").

If someone really really wants to be helpfull they could post links to each item at newegg that i would be buying, If you were going to build a system for this price, show me what it would be, Your time and effort would be really appreciated for whoever does this.

This is exactly the system i want now pretty much.
3.0ghz/800mhz(2.8 considered)
DVD-RW/CD-RW
CD-ROM
100gig HD or over
Antec power supply(400watt or over)
Case I would spend around $100-$150(something with windows)Windows XP Home
Mobo I have no clue.(I kinda prefer intel boards, im not into overclocking the processor, Intel boards are extremley stable from my experiences)
Video card for now will be something under $100


If someone can put some links of what you would for each from newegg it would be really appreciated.
 
Originally posted by Headbust
If someone really really wants to be helpfull they could post links to each item at newegg that i would be buying, If you were going to build a system for this price, show me what it would be, Your time and effort would be really appreciated for whoever does this.

Wow, can you really be that lazy? Just two posts up I gave some suggestions for keeping the price in line with what you want. Is it really that hard to type in www.newegg.com then scroll to the bottom and click on processor, then click pentium 4 and then 3.0 and add it to your own wishlist. Then click continue shopping and scroll down again and click on motherboards-intel (I am pretty sure Intel boards will be one of your options on the next screen) find the one that meets your needs. Continue this process until you have selected everything you want. If one of the categories you need is not at the bottom of the front page, you click on the link that says More and it will take you to a page where you can find the other things.
 
Originally posted by Headbust
If someone really really wants to be helpfull they could post links to each item at newegg that i would be buying, If you were going to build a system for this price, show me what it would be, Your time and effort would be really appreciated for whoever does this.
Quit being lazy and look it up yourself. You might just actually learn something.

I'm curious, are you going to have someone assemble this computer for you too?
 
Back
Top