Can celeron go over 3.8GHz

Kazaam

n00b
Joined
Jan 23, 2007
Messages
11
I've Asus P5PL2 and Celeron 326 2.53ghz. Only by inc FSB to 200 i achieved 3.8GHz (actually 3.81), and is 100% error free (it's running prime95, SuperPi, and lots of games with no problem). When ever I go to 200+ the computer always fail to start up. My guess is that ram is holding it down. I have A-Data 2*256mb DDRII 533MHz CL 4-4-4-11-16. In bios I can set only DDR 533 or DDR 400 and CL timings, but not the FSB : DDR ratio.
Can someone give me a hint.
 
Use DDR2-400, set your ram timings to 5-5-5-15 or higher, increase RAM voltage by .1v or more.
 
I've try that but it's all the same. Will anything change if I put DDR2-667MHz ram?
 
Back
Top