C2D now, or wait it out?

SLiGuy

[H]ard|Gawd
Joined
Jan 20, 2006
Messages
1,146
So I saw a deal in the Fry's paper yesterday for an E6400 + Mobo combo which I thought was pretty interesting. The board has an AGP slot and supports DDR400, which is quite odd. I was wondering if I should get the combo. Here are my current specs:

AMD Athlon 2600+ XP
Shuttle AN35N-Ultra Mobo
BFG 6800GS OC AGP
2 x 512MB Kingston HyperX DDR400

And here is the deal I saw:

http://newspaperads.mercurynews.com/ROP/ads.aspx?advid=32664&adid=3942516&subid=14516930&type=

So I was wondering if it's worth it to get it, or if I should just wait another half a year or so and upgrade to a completely new rig. I'm low on money and the most I ever see myself spending on a rig is $1000 so please take that into consideration.

Thanks for the help.
 
If you're going C2D, I would suggest at least DDR2667 at the minimum. Personally I'm using DDR2800 and believe me I dont' regret it. So I'd say save your money and put it towards a better system later rather than cash in for a lesser one now.

- P.S. - AGP is virtually dead as well.. I would not invest any more money into that technology.
 
Yes I would say skip the "deal". C2D build stuff just isnt that expensive. You could build a solid system for $700 and using good components. $550 if you want bare bones to get started. The Direct X 10 stuff will be al over soon and the Direct X 9 will be on specials. It wouldn't make the best sense to buy a AGP mobo at this point. You could probably get a whole 4 yr old system of those things on ebay for 100 bucks.
 
That deal would be an excellent stopgap on your way to a core2duo. You would be able to use your current ram and vidcard, while significantly upgrading your processor. Anandtech did several reviews on the impact of using ddr400 as opposed to ddr2 (using the AsRock 775Dual-vsta, which uses the same chipset as the ecs p4pm800pro), and the results were surprising... DDR400 is still good enough for current applications. So, if you just want a better processor for now and dont have much money, its a good deal. If you can wait, then do so.

http://dailytech.com/article.aspx?newsid=5414
 
Well, I agree with the above posters but I would argue the point about AGP being dead. It has at least two more years going for it. We have all been hearing agp is dead for a while now and it never quite goes away.
That being said, I do agree if you are gonna spend the money at this point its probably smart to make the conversion.
 
Its dead to the point where its not worth buying a new high end AGP card. If you already have one, then its fine... just don't spend too much money on anything AGP related. And with the combo deal mentioned above, you basically get a free mobo, so you're not spending much on something AGP related, just CPU, hehe.
 
if thats the actual board, it only has 2 dimms, meaning that one supports ddr andthe other supports ddr2. ouch.
 
mayonaise 812 said:
if thats the actual board, it only has 2 dimms, meaning that one supports ddr andthe other supports ddr2. ouch.
I built that combo for someone... it has 4 DIMMS, 2 slots each for the two different DDR types supported.
 
Back
Top