Buying Guidance

ohnnyj

Gawd
Joined
Jun 7, 2004
Messages
575
I don't know what to get, please help.

I am finally getting all my stuff together for a really awesome system so that I can retire my faithful 1.4 T-bird and GeForce3 car and I need advice in picking out the best of the best in everything.

What I know for sure is the following:

CPU FX55 - going to purchase soon
Motherboard A8N-SLI - own one
Video Card BFG 6800GT PCIe - own two
Case Lian Li 2100-V - going to purchase soon
Hard Drive(s) - 2 Raptors for sure but what for storage? 400GB Seagate w/NCQ?
Memory? - need help but I know I want 2GB total, are these any good?
Sound Card? Audigy 4 ok?
Liquid Cooling? Koolance? What would I need for a complete cooling system?
DVD Burner? Plextor 16x?
Power Supply? Enermax? Antec?
Headphones? Anyone know a great pair of gaming headphones?
Anything I am missing?

Thanks to all who help me out!

- John -
 
yes, I'd go with the 400GB Seagates
that is great ram
since you're getting the best of the best, get a PCP&C 510W SLI PSU


nice system :drool:
 
The Audigy 4 isn't worth it. It's only an increase of 5db over the Audigy 2 ZS Platinum models.
 
If you can afford it, and it looks like you can :) , Dangerden makes some awesome watercooling kits for about 200+ dollars.

Recommended parts:

Dangerden TDX waterblock for a64
1/2 OD fittings
7 (or 10 feet depending on your case size) 1/2 OD tygon tubing
Black Ice pro radiator
Danger Den DCC-12v Pump adapted to 1/2 OD fittings
5 1/4 Bay Resovoir (uv green or blue)
handful (12 or 20) of hose clamps

not including thermal paste and a fan for the radiator thats about 232 bucks.

If you dont want all of that stuff housed in your case, you could spend about the same amount on a koolance exos kit w/ waterblock that sits on top of your case.
 
Is it difficult to install this stuff? Can I run this stuff through both GPUs?
 
The ram you could go with the OCZ EL Platinum Rev.2 ram. It was rated the best by Anandtech. And a lot of people here use it.

Definitely go with a Plextor SATA DVD Burner. Hopefully they have a 16x out by now.

Nice choice in board and processor.

If you really want speed, then you should just go with a raid SCSI setup. at 15k RPM and better read times then a WD Raptor. You can't beat it.
 
If its the difficulty level of installation your worried about, then I suggest you use the koolance exos. You might have to remove your motherboard from the case if your installing everything before you buy the watercooling system.

Aluminum Koolance exos:
http://www.newegg.com/app/viewProductDesc.asp?description=11-155-987&depa=01

it comes without a CPU waterblock, so you'll have to buy one.

DangerDen TDX water block:
http://www.dangerdenstore.com/product.php?productid=17&cat=58&page=1

As for cooling both 6800s.......The best block is going to cost you:

DangerDen NV-68:
http://www.dangerdenstore.com/product.php?productid=64&cat=48&page=1

If you dont have enough for 2 of those, then dont sweat it, just use air cooling or a lower model water block w/ ramsinks.
 
Back
Top