Burst vs. Avg Read Speeds ?

BassKozz

Limp Gawd
Joined
Nov 10, 2005
Messages
311
How does burst speed impact disk preformance?
How does average read speed impact disk preformance?

Can someone explain these two readings from HDtach ?
Raid5_MegaRaidi4_3xSeagate400gb.jpg


Thanks,
-BassKozz
 
burst speed is basically read speeds from the cache of the disc, avg read speeds are the average read speed across the entire platter.
 
Here are 2 of my Raptors against each other...they are pretty close to each other eh?..:)

hdt8my.jpg




..what kind of discs are you using, and in what array?
Im guessing a RAID 5..based on the results you got..
 
serbiaNem said:
Why is the random access time so different between your raptors?

Different firmware.....The 00FLA2 revisions are known to be a little faster...
 
defakto said:
burst speed is basically read speeds from the cache of the disc, avg read speeds are the average read speed across the entire platter.
So burst speed doesn't really matter in the long run... only Average Read speed... correct?
Crosshairs said:
..what kind of discs are you using, and in what array?
Im guessing a RAID 5..based on the results you got..
Yes it is a RAID 5 array:
LSI MegaRaid i4 Controller card and 3x 400gb Seagate HD's

Thanks
 
Correct on the average read speed being more important than burst speed. Which would you rather have? I drive that bursts 600 MB/s for 1/2 second and has an average speed of 30 MB/s or a drive that bursts at 100MB/s for 1/2second with an average read speed of 80 MB/s?
 
defakto said:
Correct on the average read speed being more important than burst speed. Which would you rather have? I drive that bursts 600 MB/s for 1/2 second and has an average speed of 30 MB/s or a drive that bursts at 100MB/s for 1/2second with an average read speed of 80 MB/s?

Great, Thanks for the help defakto :D
 
Back
Top