Bulding a New PC

HomerRulez

[H]ard|Gawd
Joined
Apr 17, 2005
Messages
1,362
I was wondering if anyone knew of a site that will help me put together these parts that I have aka will be getting soon

evga 680i A1 revision
e6600 with stock stuff (going to buy a better cooler in a week or two)
2x 7800gt oc
2x1gb ddr2 pc6400ram
centurion 532 cooler master case
lg dl dvdrw 18x
250gb sata 2 seagate 7200.10

any tutorial that has a very similar system hooked up together? I want to get the parts in properly without problems. Including putting the stock heatsink and fan in properly with the proper thermal paste applied. Oh and making sure the case is hooked up to the mainboard properly too. With everything on the case working. I wanna study up as soon as possible before I get all the stuff in. This way im ready to pop this sucker in, take pictures, benchmark it and go zoom zoom zoom. Like in the commercial! Ill post the pics here when done. I might even video record it but no one wants to see me strugling to get the damn ram in or do they? :eek:
 
a step by step isn't REALLY needed.
Everything only goes in 1 way.

for the motherboard connections refer to the manual. If the power doesn't turn on... flip the connector upside down (I always have this problem)
 
a step by step isn't REALLY needed.
Everything only goes in 1 way.

for the motherboard connections refer to the manual. If the power doesn't turn on... flip the connector upside down (I always have this problem)


wa bout the cpu e6600? im not sure if it has thermal paste or the pad version. However if it has paste, how much to use of it?
 
how bout this, anyone want to put my pc together for me? Im not exactly littered with money but I will pay for the trip, service of course and will supply what ever food you desire :eek: .Also when one receives a hard drive, does it come in all zeros? This way I wont need to format it right? Well maybe just to get the right file system on it.
 
wa bout the cpu e6600? im not sure if it has thermal paste or the pad version. However if it has paste, how much to use of it?

A thin layer across the entire surface is all that is required. If you use too much it will leak out the sides when you apply the heatsink = bad.

how bout this, anyone want to put my pc together for me? Im not exactly littered with money but I will pay for the trip, service of course and will supply what ever food you desire :eek: .Also when one receives a hard drive, does it come in all zeros? This way I wont need to format it right? Well maybe just to get the right file system on it.

yes, the hard drive will come unformatted. Windows will take care of formatting it for NTFS all by itself.

EDIT: for you.

http://www.tomshardware.com/2002/09/04/building_your_own_pc/
 
lemme ask this question. Are the c2d cpus pinless?

If so, there is the reason why I would be way over my head trying to put this system together! Why, cause I have never ever even seen a cpu that was pinless! Man im screwed!
 
Dude, don't worry about building a PC. Like cyr0n_k0r said, everything goes in ONE way. It's fool proof. All you have to do is carefully analyze each part, insert it and there you go. If you need some additional tutorials how to build a PC, go on youtube.com and search for "How to build a computer."

I'm betting you'll find quite a bit of videos showing you how.
 
Plus the CPU and the socket should both be marked, usually with a triangle, showing you how the CPU is supposed to be inserted.
 
http://www.mechbgon.com/build/index.html

The pins are on the motherboard instead of the CPU... but installation is the same, you lift the lever, stick in the CPU, and close the lever... there is, however, a retention bracket that will help hold down the CPU now. The stock cooler comes with paste pre-applied to the bottom. Play with the retention mechanism of the cooler before installing it, so you know how it works and how it will be attached to the board -- just to familiarize yourself with it. Follow all the instructions in the mobo manual, and you'll be fine. If you need help, just post the question.
 
Back
Top