Built a new system, getting blue screens

Joined
Nov 4, 2002
Messages
654
Okay, so I just built this new system. Specs:

- AMD Athlon 64 X2 3800+ Dual Core Processor S939 Manchester 2Ghz 512KBX2
- DFI LANParty UT NF4 ULTRA-D
- Corsair Value Select PC3200 1GB 2X512MB DDR400 184PIN DIMM Dual Channel Memory Kit
- eVGA E-GEFORCE 6600GT 128M DDR3 PCI-E
- SEAGATE BARRACUDA 7200.8 250GB SATA W/ NCQ
- ANTEC SONATA II
- LG GSA-4167B 16X DVD+-RW 16X Dual Layer

Anywho, running XP I keep getting bluescreens. They seem to be at random times, I started keeping track of the errors. First was a 0x000000FC (Data Execution Prevention related), so I disabled DEP. But then I got a 0x00000050....I dont know where these are coming from. Memtest says the RAM is good, and I have the latest drivers for my video and audio. However, when the install of the nForce4 drivers (v 6.66) seems to be done a window pops up with nothing but the text "1155:" and an okay button.

Can someone help me? Whats going on?
 
How long have you memtested? It might say its good, but did you run it for a long time? Sounds like a good memory problem but just to be sure, reseat all your cards, and your ram again.
 
new error: 0x000000BE

these are starting to seem memory related. i have the ram running dual-channel in slots 2 and 4, i'm gunna try running one at a time in slot 1...

edit: also tried turning off the page file, still got a stop; 0x0000008E this time
 
before i install windows I set my memory to SPD, Default Speed and run memtest for a full 24 hours. If I come back to my PC with no errors, I will install.
 
Back
Top