Building now with problems

YesPlz

Limp Gawd
Joined
Jun 26, 2007
Messages
245
Well my parts thread is here. I cant seem to get the Tuniq 120 fan RPM adjuster to fit into the PCI slot of the P182. The knob on the tuniq adjuster wont fit through the slot. Also I havent ran any of the PSU's cables yet as im not sure what all i need yet. Are there any guides to powering the pc? Thanks for any help. My memory should be in tomorow so i can finish my build and test it.
 
did you try removing the knob? it should come off then slide back on once you get it thru the slot.
 
Also I havent ran any of the PSU's cables yet as im not sure what all i need yet. Are there any guides to powering the pc?

from your parts thread, I posted this...


Was it not helpful enough? Any specific questions?

Looks like all you need for the motherboard is the 24-pin ATX main power connector, and the 4-pin (2x2) P4 12V connector. Your drives only take a certain plug, either molex or sata, so use the corresponding plug from the PSU. The vidcard needs the 6-pin PCI-E connector.
 
thanks for the info. also I shouldn't use the fan only plugs since my case fans already have a high medium and low adjustment on the back of the case correct? also would you guys recommend I use the dvd burner from my old pc or buy a sata burner (saw the newegg deal for $38 liteon)?
 
Its up to you whether or not you want to use the fan only plugs or the fan controller. The DVD burner is also up to you. If you want to have only small cables in your system, then go for a $30 sata dvd burner. For my E6400 build, I bought two new sata optical drives. For my E4300 build, I just re-used my old pata optical drives.
 
Good call on the small cables. Also one of the cables from my corsair has two of the large 4 pin power adapters. I was planning to hook my 3 fans upto the first 4 pin and my HD on the second 4 pin. Also is there any advantage to using SATA power cable instead of the legacy ATA power cable for my HD? Also what parts require warranty registration? I know the graphics card does and maybe the processor?
 
Good call on the small cables. Also one of the cables from my corsair has two of the large 4 pin power adapters. I was planning to hook my 3 fans upto the first 4 pin and my HD on the second 4 pin. Also is there any advantage to using SATA power cable instead of the legacy ATA power cable for my HD? Also what parts require warranty registration? I know the graphics card does and maybe the processor?

Advantage to using the SATA Power plug instead of the legacy molex: hot swappability.

I believe its just the vidcard.
 
enginurd, i really appreciate all the help you have been offering. People like you keep the forum going. I also decided i would go with a new mouse and keyboard and i have 200 dollar gift certificate to circuit city. i am heading up there today to see if they have a Razer Copperhead mouse on display and the Razer Tarantula keyboard. Thinking about using my gift cards on that mouse/keyboard combo.
 
Back
Top