Building my first WHS, PSU Question...

Greatone123

[H]ard|Gawd
Joined
May 10, 2006
Messages
1,293
I'm sure you've seen these what PSU should I get, how much power is needed... blah blah blah... mine has a slight difference to it tho...


Building a WHS for the first time, read so much in here about it I basically convinced myself it's a must have.


Case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811219035

I personally don't need that much space to justify the big 4220. I figure 8TB is more then I'll ever ever ever need, I'll prolly turn on duplication for everything, my current storage consists of 3x 250GB HDDs... and it's not near full. I just want the back up features, and ease of use that comes with the WHS.

Controller Card:
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115057

knowing the new norcos use SAS, I figured might as well use it. It has 2x MiniSAS connections so it kinda fits the bill.

HDDS:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136317

Do I really need to explain why? Their green and hold 1TB... I'll start off with 2 or 3 of them and work my way up to 8.


I've got a BioStar 790GX board and a AMD 4850e layin around I'll use, low power and well I already have it so price is ok, has 2x PCI Explress x16 slots, so I'm hoping I can use one for the HP Card.


BUT! after all that, the actual question...

I know what normal sized PSU's I like and use... but I've never looked at the 2U PSU's... what do you guys recommend for that? Some brands in there I'm not real familiar with. I prefer to buy from Newegg, just because of familiarity...
 
I would recommend FSP or Thermaltake for your needs. If you happen to run into them, AbleCOM also make very good PSUs (and used to be the exclusive SuperMicro PSU vendor).
 
I've looked at the brands I know from standard ATX PSU's... but FSP doesn't have one that will fit my case, and thermaltake's is close to $400 because it's redundant.

I've never heard of most of the brands I see on their site which is why I asked...

Should maybe this be moved to the PSU forum? I guess that would make sense... I guess maybe I got side tracked since it's a WHS build... someone wanna move it? or should I repost?
 
I'd PM an Mod with a link to this thread, asking it to be moved.
 
I'm sure you've seen these what PSU should I get, how much power is needed... blah blah blah... mine has a slight difference to it tho...


Building a WHS for the first time, read so much in here about it I basically convinced myself it's a must have.


Case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811219035

I personally don't need that much space to justify the big 4220. I figure 8TB is more then I'll ever ever ever need, I'll prolly turn on duplication for everything, my current storage consists of 3x 250GB HDDs... and it's not near full. I just want the back up features, and ease of use that comes with the WHS.

Controller Card:
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115057

knowing the new norcos use SAS, I figured might as well use it. It has 2x MiniSAS connections so it kinda fits the bill.

HDDS:
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136317

Do I really need to explain why? Their green and hold 1TB... I'll start off with 2 or 3 of them and work my way up to 8.


I've got a BioStar 790GX board and a AMD 4850e layin around I'll use, low power and well I already have it so price is ok, has 2x PCI Explress x16 slots, so I'm hoping I can use one for the HP Card.


BUT! after all that, the actual question...

I know what normal sized PSU's I like and use... but I've never looked at the 2U PSU's... what do you guys recommend for that? Some brands in there I'm not real familiar with. I prefer to buy from Newegg, just because of familiarity...

I realize your question was about which PSU, but your controller card selection is a bit off. You don't need a RAID card for WHS. Something like the new Supermicro SASLP-MV8 would be perfect for your build, at about half the price of the Highpoint. There have been a few early compatibility problems with the SASLP, but lately I haven't heard of any problems.

As for PSU, I just put a Antec 350W SFF PSU in one of my HTPC's. Not sure how it would do in a server though.
 
Back
Top