building four small(ish) dekstop client machines

mikeblas

[H]ard|DCer of the Month - May 2006
Joined
Jun 26, 2004
Messages
12,777
I have a little project where I'd like to have four client computers to simulate load and do testing against a server. They'll have to be small; I want three or four in a pile, connected to my network and a KVM to a single monitor and keyboard.

I was thinking about buying used OptiPlex machines, but they seemed expensive. I've also heard about the machines that I'm interested in -- say, the GX270 or GX280 -- having bad capacitors.

Looking at building my own, I've found the IN WIN IW-D500T.240BFU2AD case. Is this any good? It's the cheapest case that doesn't have miserable reviews at NewEgg about the crappy build quality, or parts cracking, and so on. Would you recommend anything else

I'm going to use 3500+ or 3800+ Athlon 64 X2 processors.

I've chosen the ASUS A8N-VM motherboard, I think. Is there another micro-ATX motherboard with onboard gigabit and a decent video chip that you'd recommend? The A8N-VM supports PCIx16 in case I do want to add "real" graphics cards.

Can anyone recommend a better motherboard? Cheaper, with the same features?

Even with these parts, I can put togethre four machines and throw in the KVM switch for about $2000.

I can find lots of five GX260's on eBay for about $1600 shipped; how would they compare to this build? They're not going to be dual core, and most of the used machines don't have a gig of memory. Is there a way to get trim costs on this build?
 
As an eBay Associate, HardForum may earn from qualifying purchases.
on tigerdirect, they have P4 2.4 dells for 200 dollars, but i don't know what you're using it for.
 
This one? That's $209 after rebate, but they charge $39 shipping. That puts me at $250 per machine; AGP, no gigabit networking, and only 256 megs of RAM. Both my build as it stands above and the eBay OptiPlexes seem like a better deal.
 
3800+ X2's are about $150, there are no 3500+ X2's.

If you don't really need GeForce 6150 based boards, the 6100 is fine. The Biostar is a good, stable one. Otherwise, the Foxconn board is cheaper than the Asus. It's pretty stable, too. I use one for my media pc.

I use Optiplex GX620's and GX280's (3.4Ghz P4 HT's/1GB DDR400) at work... they're ok for development, but suck for multitasking. Four 3800+ X2 machines would burn 'em.

70 Foxconn 6150K8MA-8EKRS mobo
150 3800+ X2
105 1GB DDR400
45 80gb sata3g hdd
65 inwin case
=================
435 + tax
4*435 = 1740 + tax should leave you with enough for a good 4 port KVM.
 
Back
Top