• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Build log for Watercooling

S

Solidus1833

n00b
Joined
May 7, 2014
Messages
6
Im looking to Water-cool my 2x evga 680 classified cards. Also my cpu.

I will give you all my current set up. I would like to rebuild in the same case.

Cpu: 3570k @ 4.5hz
Mobo: P8z77-V
Cpu Cooler: Corsair H110
Psu: Corsair Hx 1050
Case: Roswell BlackHawk Ultimate
Gpu: 2x Evga 680 Classified


Now tbh my temperatures are pretty good. Under Prime 95 my cpu will not go over 48c
And my cards under load are around 50-71c depending on the game. I have a push pull config on the Radiator for the cpu using Noctua fans. All the case fans are filled with bitfenix 140mm fans. I have them all controlled with two fan controllers so its never really loud. I have always wanted to fully watercool my system but i have really no idea where to start getting a list of parts i need. I would want to drop the corsair H110 all togather and have one massive loop between the cpu and gpu with two big ol radiators. If i need to get a diff case im thinking about the Mercury S8 for full moddular awesomeness..

http://imgur.com/8Br3GSX
 
Last edited:
So did you get anywhere with this?

In a previous build I had a 3930k with 2 GTX 680s all cooled by a 240mm x 25mm radiator and a 240mm x 60mm radiator. My GTX 680s never broke 40C at full load.

I still have the waterblocks if you are interested.
 
You must log in or register to reply here.
Back
Top