BSOD, pointing to memory

Farva

Extremely [H]
Joined
Feb 3, 2004
Messages
38,145
Ok, so I am getting 2 different error codes, mostly the PAGE_FAUL_IN_NON_PAGED_ARE 0x0000000A which points to memory (either RAM or video card). I just replaced the RAM so I highly doubt it is that.

The other error code is win2k.sys 0x0000008E. I almost want to say this is a bad drive but I'm not sure. This is even after a full reinstall of XP.

In the machine I have:

AMD 3000 Venice
1GB (2x512) Corsair (replaced the Elixir 512 DDR400
Asus A8V
ATI 9600 Pro (128MB)
WD 80GB
WD 160GB
3x WD 320GB (all drives are PATA)
Happauge 401
Creative Sound Blaster X-Fi Xtreme Audio 7.1 (just replaced Audigy ES)
SIIG promise card (not sure of the exact model)

Even after I got the 0x0000000A error, I then ripped out the Happauge to make sure. I'm thinking it is the video card.
 
Ok, so I am getting 2 different error codes, mostly the PAGE_FAUL_IN_NON_PAGED_ARE 0x0000000A which points to memory (either RAM or video card). I just replaced the RAM so I highly doubt it is that.

The other error code is win2k.sys 0x0000008E (I think this is the code, I'll edit this when I get home and make sure). I almost want to say this is a bad drive but I'm not sure. This is even after a full reinstall of XP.

In the machine I have:

AMD 3000 Venice
1GB (2x512) Corsair (replaced the Elixir 512 DDR400
Asus A8V
ATI 9600 Pro (128MB)
WD 80GB
WD 160GB
3x WD 320GB (all drives are PATA)
Happauge 401
Creative Sound Blaster X-Fi Xtreme Audio 7.1 (just replaced Audigy ES)
SIIG promise card (not sure of the exact model)

Even after I got the 0x0000000A error, I then ripped out the Happauge to make sure. I'm thinking it is the video card.


Maybe I'm confused by the way you wrote it, but how are you fitting five PATA drives in your system? IDE only supports two devices per channel.

Also, did you get these fault codes before you replaced the RAM? If not, the new RAM is a good place to start.
 
Maybe I'm confused by the way you wrote it, but how are you fitting five PATA drives in your system? IDE only supports two devices per channel.
See the SIIG hard drive controller.
Also, did you get these fault codes before you replaced the RAM? If not, the new RAM is a good place to start.
Both times. This is what is confusing me and leading me to believe it is the memory on the video card.
 
Maybe I'm confused by the way you wrote it, but how are you fitting five PATA drives in your system? IDE only supports two devices per channel.

Also, did you get these fault codes before you replaced the RAM? If not, the new RAM is a good place to start.

I would be willing to bet the Promise card is IDE if all of the drives are PATA.

OP, are you overclocked? If so, remember that the memory controller on the CPU die and this could lead to memory related problems. I had the same thing happening with my system. Set everything back to stock and it runs fine for days.
 
I would be willing to bet the Promise card is IDE if all of the drives are PATA.
Correct

]OP, are you overclocked? If so, remember that the memory controller on the CPU die and this could lead to memory related problems. I had the same thing happening with my system. Set everything back to stock and it runs fine for days.
I do not OC. Although, I keep forgetting to reset the CMOS. Hopefully by me writing this here I'll remember to do it when I get home tonight.
 
OK, another problem could be a bad memory slot on the motherboard then. That is surely not uncommon. Try running some sort of memtest with just one stick in, then swap it for just the other stick. If that is all good then stick both in. If you get errors try swapping the sticks around in the slots. Run again and see if you get errors.

I would say that if you are getting errors with either of the single sticks in then your 1st mem slot is prolly bad. If both of those tests are good and your getting errors with both sticks in (in both configurations) then your second mem slot is prolly bad.
 
OK, another problem could be a bad memory slot on the motherboard then. That is surely not uncommon. Try running some sort of memtest with just one stick in, then swap it for just the other stick. If that is all good then stick both in. If you get errors try swapping the sticks around in the slots. Run again and see if you get errors.

I would say that if you are getting errors with either of the single sticks in then your 1st mem slot is prolly bad. If both of those tests are good and your getting errors with both sticks in (in both configurations) then your second mem slot is prolly bad.
I shall run memtest tonight. I only had 1 stick in there originally and bought 2 sticks to run dual channel. I got errors then and now. So that is more likely the first slot. Oh, and I had problems with the 9600 Pro in another system (that I threw it in this system), so I am not counting that out either.
 
Honestly I don't think it has anything to do with the video card. After looking up the 0x8E error code that one seems to point toward the memory also. Usually vid cards will lock up a system, artifact the display, or just reboot the entire system completely. It is certainly sounding like a bad motherboard memory slot.
 
Honestly I don't think it has anything to do with the video card. After looking up the 0x8E error code that one seems to point toward the memory also. Usually vid cards will lock up a system, artifact the display, or just reboot the entire system completely. It is certainly sounding like a bad motherboard memory slot.
Hopefully that is all that is wrong with it. I would rather know what is wrong than pull my hair out trying to figure this out.
 
Ok, so far it memtest has run for 4 hours (11 passes) and currently no errors with both sticks in.

Edit: Now at 5 hours and 14 passes. I'll leave it on overnight to see if it picks up anything.
 
Ok, at pass 16 there was an error. Time to find out which module/slot is bad.
 
First stick passed after 8 hours of testing and 37 passes (slot 1). Second stick is in there now.
 
After 78 passes of the 2nd stick on slot 1, it is good. I then tried both sticks on the 2 bank on each side, failed. I am now testing both sticks in bank 1.

It appears both slots on the 2nd bank are bad :( :mad: So it appears I may be RMAing my Asus mobo.
 
I know that it is a long and painful process to go thru all of this but atleast your getting it narrowed down now.
 
I know that it is a long and painful process to go thru all of this but atleast your getting it narrowed down now.
Ya, about as fun as watching the grass grow or watching paint dry. At least I have 2 other systems I can use while testing this. So far 3 passes have gone by with both sticks in bank 1. No errors so far. When one stick was in bank 1 and other in bank 2, it failed withing 5 minutes. Can you run dual channel memory so it does not run dual channel? :confused:
 
You mean run a dual channel memory kit in single channel mode? Yes you can do that if that is what you would really like to do to avoid RMA.
 
You mean run a dual channel memory kit in single channel mode? Yes you can do that if that is what you would really like to do to avoid RMA.
Well, for the time being so I can use 1GB and not crash. I will RMA if this test passes and the next tests I do in bank 2 fail. I'm almost sure it is both slots in bank 2 that are faulty. I'll keep you guys posted on what happens.
 
sounds good.... glad I could be of help. Hopin you get your prob fixed for good.
 
Well, bank 1 went for 6 hours (not sure of the amount of passes), but I got no errors. I'm currently running both sticks in bank 1. I have been running my machine with utorrent for the last 30 minutes now and no BSOD yet. If it stays up the rest of the day, I'll know for sure it is bank 2 and not anything else. I'll let you know if it stays up and running.

When I get my new case and new parts for another storage machine, I'll RMA this board to Asus and hopefully I will not have any more problems when I get it back. Once I get the new board, I'll post back on that.
 
Ok, my system running without crashing so far, before it would crash pretty quickly. So I will be RMA'ing the mobo as soon as I get my other system up and running.
 
Back
Top