BSOD on my new setup

Kvakkle

n00b
Joined
Apr 4, 2011
Messages
8
Hello.
I was wondering if anyone could help me out here.
when i start the computer every thing goes as normal, and abit after windows as loaded i get blue screen, i have done memory test memtest 86 or something=) but no errors there.
I think it happen after i installed the graphics driver.
My setup is:
Intel 2600k
Sabertooth motherboard.
4x4gb corsair vengeance ram
GTX 580 x2 sli
 
I would pull the 2nd 580 ad try to get it running stable first before adding another for sli. Did you go into BIOS and load optimized defaults?
 
Yeah see if its stable on one 580 first.

Also are you on the current BIOS?
 
I tried with one of both 580 cards, tried optimized defaults and I have a Chieftec 1200W psu =) so it should be enough power.
temp on cpu: 28-33 cels. Got the Corsair h70.
on the MB it about 35 I think I saw in the bios.
I have the standard Bios, havent upgraded it.
Thanks for replying so fast=)
 
do 1 stick of ram and try all your slots one might be bad could be drivers to what is the code of the bsod?
 
I think I have tried everything now... Bios version is 1305, newest I think?
One ram stick in each ram slot. each graphics card separately, I have no idea what to try next? Send my mother board inn to the store where I bought it maybe?
 
The BSOD sais:

Technical Information:

*** Stop: 0x0000003D (0xFFFFf80000B9c060, 0x0000000000000000, 0x00000000000000000, 0xFFFFF8800131278E)

*** MV91.sys - address FFFFF8800131278E base at FFFFF880012E1000, datestamp 4c778a22
 
I think and hope I fixed it now, Driver issue. Uninstalled a Marwell controller or console thing. =)
 
Back
Top