Boot to DOS with USB Flash Drive - How?

bobwoz

n00b
Joined
Jul 22, 2007
Messages
8
Does the Gigabyte P35-DS3R support booting up with a USB flash drive? This is a brand new build, and I'm *hoping* it will be my first without a floppy drive.

But, dang - I really need to be able to boot with a memory stick for the occasional BIOS flash, etc. Yeah, I know I can do it in Windows, but I'm old school and don't trust it.

I've been all over the web and tried all sorts of ways of formatting the thing, but the computer won't see it. Does this mobo even support it? I'd be shocked if it didn't, but how the He!! do you do it??? :confused:

Please help!! :eek:
 
Does the Gigabyte P35-DS3R support booting up with a USB flash drive? This is a brand new build, and I'm *hoping* it will be my first without a floppy drive.

But, dang - I really need to be able to boot with a memory stick for the occasional BIOS flash, etc. Yeah, I know I can do it in Windows, but I'm old school and don't trust it.

I've been all over the web and tried all sorts of ways of formatting the thing, but the computer won't see it. Does this mobo even support it? I'd be shocked if it didn't, but how the He!! do you do it??? :confused:

Please help!! :eek:

Try doing a google search with this phrase "bios flashing using a thumb drive"
No need for quote marks.
 
I've tried all of those methods. The BIOS sees the USB stick, it just won't boot from it.. I've formatted it and copied boot files with several different methods. I've set the BIOS to boot from every USB device listed (HDD, ZIP, floppy, etc...) It just won't boot to DOS. :mad:

HELP!!!

What am I doing wrong??? :confused:
 
There are two ways to format the USB drive. The first is similar to a hard drive -- with partition table, etc. The second is similar to a floppy drive (no partition table). Many boards will boot from a USB stick only if it has been formatted using the preferred format type; and the preferred format type varies from board to board.

Did you format the drive using the HP USB drive format tool (search for "HP USB format tool" at Google)? Run it on the PC where you want to boot the USB drive, and it should format the drive with the appropriate type of formatting.
 
Does the Gigabyte P35-DS3R support booting up with a USB flash drive? This is a brand new build, and I'm *hoping* it will be my first without a floppy drive.

But, dang - I really need to be able to boot with a memory stick for the occasional BIOS flash, etc. Yeah, I know I can do it in Windows, but I'm old school and don't trust it.

I've been all over the web and tried all sorts of ways of formatting the thing, but the computer won't see it. Does this mobo even support it? I'd be shocked if it didn't, but how the He!! do you do it??? :confused:

Please help!! :eek:

I've just done this, now I know this link aint for the same make as your mobo but the principle is the same:

http://forum.abit-usa.com/showthread.php?t=121953

Please read it and then download:

HP USB Disk Storage Format Tool
http://www.pcworld.com/downloads/fi...,1-c,allperipheralsdownloads/description.html

and

then download this (Win 98 system files) below, extracting it to a temp folder on your hardrive:
http://files.extremeoverclocking.com/file.php?f=196

Put you memory stick in your USB port the Run the "HP USB Disk Storage Format Tool",
select FAT32, check the "Create a DOS startup disk" and navigate to the temp folder you unpacked the Win98 systems files to, press Start and it makes a DOS bootable USB stick.

You may have to dive into your BIOS and enable boot from USB AND change the boot order to your USB stick first (if your mobo supports this)

after that just place the BIOS you want to flash to on the USB stick (not in a folder) reboot with your USB stick in a port and you should boot into DOS.

For me after that it was a simple as typing "runme.bat" as the flash was done! :)

Shut down clear CMOS, reboot and your good to go.
 
Thanks so much, guys!! I *finally* got it to work! :D

I had run the HP utility at least 10 times, trying all sorts of DOS files, every kind of USB device in the BIOS I could find... :mad:

What I must have missed is that the formatted USB stick had to be inserted in the box while changing the hard drive boot order. In other words (at least on this mobo) even though you have several USB devices available in the boot order, you have to keep "hard drive" as the first boot device, *and* change which hard drive (USB-0) to boot from - that "USB-0" won't appear unless the USB stick is 'stuck' in the computer!

I was about to kick my dog... :rolleyes: Oh - and thanks, Gigabyte, for including that in the manual! ;)

Thanks again!!
 
Back
Top